Weld-Craft 18 Angler

Q: What years was the Weld-Craft 18 Angler produced?

Our records show the Weld-Craft 18 Angler was available from 2012 through to 2013 — a production run of 2 model years. Use the year cards above to find the specific year you're researching.

Q: How long is the Weld-Craft 18 Angler?

The Weld-Craft 18 Angler measures 18.58 feet in overall length. Always confirm against the specific year sheet, as dimensions can vary between model year revisions.

Q: How much does the Weld-Craft 18 Angler weigh?

The Weld-Craft 18 Angler has a documented dry weight of 1326 lbs. Add your motor, fuel, and gear when calculating total towing weight.

Q: What is the maximum horsepower for the Weld-Craft 18 Angler?

The Weld-Craft 18 Angler has a maximum engine rating of 115 hp. Always fit an engine at or below the rated maximum to stay within the builder's safety specification.

Q: How many people can the Weld-Craft 18 Angler carry?

The Weld-Craft 18 Angler is rated for 5 passengers. As a practical guide, most experienced skippers aim for around 80% of rated capacity for a comfortable day on the water.

Q: What hull type does the Weld-Craft 18 Angler use?

The Weld-Craft 18 Angler features a aluminum deep vee hull. Deep-V and modified-V hulls cut through chop efficiently and are popular for fishing and general runabout use.

Q: What is the fuel capacity of the Weld-Craft 18 Angler?

The Weld-Craft 18 Angler carries a 27-gallon fuel tank. Actual range depends on motor choice, load, and conditions.

Q: Who makes the Weld-Craft 18 Angler?

The Weld-Craft 18 Angler is manufactured by Weld-Craft. Browse the full Weld-Craft spec catalogue to compare other models from the same range.

Weld-Craft 18 Angler — all spec sheets

Tiny

Model Overview

Weld-Craft 18 Angler Specifications

Length18.58 ft

Beam90 in

Weight1326 lbs

Max HP115 hp

Fuel27 gal

Capacity5 people

Years Made2012–2013

HullDeep Vee

MaterialAluminum

The Weld-Craft 18 Angler was built across 2 model years, from 2012 through to 2013 — a aluminum deep vee design with outboard propulsion.

Documented specifications include 18.58 ft in overall length, a dry weight of 1326 lbs, a maximum engine rating of 115 hp, capacity for 5 people and a 27-gallon fuel tank. Click any year card below to view the full spec sheet.

Specifications are consistent across all model years in our database.

Browse by year

2012 2013

Compare model years

2012 vs 2013

Spec sheets — all years

Weldcraft Marine 18 Angler 2013 Boat Specs

2013

View specs →

Weldcraft Marine 18 Angler 2012 Boat Specs

2012

View specs →

Weld-Craft 18 Angler — Common Questions

What years was the Weld-Craft 18 Angler produced?

Our records show the Weld-Craft 18 Angler was available from 2012 through to 2013 — a production run of 2 model years. Use the year cards above to find the specific year you're researching.

How long is the Weld-Craft 18 Angler?

The Weld-Craft 18 Angler measures 18.58 feet in overall length. Always confirm against the specific year sheet, as dimensions can vary between model year revisions.

How much does the Weld-Craft 18 Angler weigh?

The Weld-Craft 18 Angler has a documented dry weight of 1326 lbs. Add your motor, fuel, and gear when calculating total towing weight.

What is the maximum horsepower for the Weld-Craft 18 Angler?

The Weld-Craft 18 Angler has a maximum engine rating of 115 hp. Always fit an engine at or below the rated maximum to stay within the builder's safety specification.

How many people can the Weld-Craft 18 Angler carry?

The Weld-Craft 18 Angler is rated for 5 passengers. As a practical guide, most experienced skippers aim for around 80% of rated capacity for a comfortable day on the water.

What hull type does the Weld-Craft 18 Angler use?

The Weld-Craft 18 Angler features a aluminum deep vee hull. Deep-V and modified-V hulls cut through chop efficiently and are popular for fishing and general runabout use.

What is the fuel capacity of the Weld-Craft 18 Angler?

The Weld-Craft 18 Angler carries a 27-gallon fuel tank. Actual range depends on motor choice, load, and conditions.

Who makes the Weld-Craft 18 Angler?

The Weld-Craft 18 Angler is manufactured by Weld-Craft. Browse the full Weld-Craft spec catalogue to compare other models from the same range.