Custom Weld 19 ft. Viper Series

Q: What years was the Custom Weld 19 ft. Viper Series produced?

Our records show the Custom Weld 19 ft. Viper Series was available from 2011 through to 2013 — a production run of 3 model years. Use the year cards above to find the specific year you're researching.

Q: How long is the Custom Weld 19 ft. Viper Series?

The Custom Weld 19 ft. Viper Series measures 18.67 feet in overall length. Always confirm against the specific year sheet, as dimensions can vary between model year revisions.

Q: How much does the Custom Weld 19 ft. Viper Series weigh?

The Custom Weld 19 ft. Viper Series has a documented dry weight of 24 lbs. Add your motor, fuel, and gear when calculating total towing weight.

Q: How many people can the Custom Weld 19 ft. Viper Series carry?

The Custom Weld 19 ft. Viper Series is estimated to accommodate approximately 5 people based on hull length. As a practical guide, most experienced skippers aim for around 80% of rated capacity for a comfortable day on the water.

Q: What hull type does the Custom Weld 19 ft. Viper Series use?

The Custom Weld 19 ft. Viper Series features a aluminum deep vee hull. Deep-V and modified-V hulls cut through chop efficiently and are popular for fishing and general runabout use.

Q: What is the fuel capacity of the Custom Weld 19 ft. Viper Series?

The Custom Weld 19 ft. Viper Series carries a 38-gallon fuel tank. Actual range depends on motor choice, load, and conditions.

Q: Who makes the Custom Weld 19 ft. Viper Series?

The Custom Weld 19 ft. Viper Series is manufactured by Custom Weld. Browse the full Custom Weld spec catalogue to compare other models from the same range.

Custom Weld 19 ft. Viper Series — all spec sheets

Medium to Small

Model Overview

Custom Weld 19 ft. Viper Series Specifications

Length18.67 ft

Beam96 in

Weight24 lbs

Fuel38 gal

Capacity5 people

Years Made2011–2013

HullDeep Vee

MaterialAluminum

The Custom Weld 19 ft. Viper Series was built across 3 model years, from 2011 through to 2013 — a aluminum deep vee design with jet drive propulsion.

Documented specifications include 18.67 ft in overall length, a dry weight of 24 lbs, capacity for 5 people and a 38-gallon fuel tank. Click any year card below to view the full spec sheet.

Browse by year

2011 2012 2013

Compare model years

2011 vs 2012 2012 vs 2013

Spec sheets — all years

Custom Weld 19 ft. Viper Series 2013 Boat Specs

2013

View specs →

Custom Weld 19 ft. Viper Series 2012 Boat Specs

2012

View specs →

Custom Weld 19 ft. Viper Series 2011 Boat Specs

2011

View specs →

Custom Weld 19 ft. Viper Series — Common Questions

What years was the Custom Weld 19 ft. Viper Series produced?

Our records show the Custom Weld 19 ft. Viper Series was available from 2011 through to 2013 — a production run of 3 model years. Use the year cards above to find the specific year you're researching.

How long is the Custom Weld 19 ft. Viper Series?

The Custom Weld 19 ft. Viper Series measures 18.67 feet in overall length. Always confirm against the specific year sheet, as dimensions can vary between model year revisions.

How much does the Custom Weld 19 ft. Viper Series weigh?

The Custom Weld 19 ft. Viper Series has a documented dry weight of 24 lbs. Add your motor, fuel, and gear when calculating total towing weight.

How many people can the Custom Weld 19 ft. Viper Series carry?

The Custom Weld 19 ft. Viper Series is estimated to accommodate approximately 5 people based on hull length. As a practical guide, most experienced skippers aim for around 80% of rated capacity for a comfortable day on the water.

What hull type does the Custom Weld 19 ft. Viper Series use?

The Custom Weld 19 ft. Viper Series features a aluminum deep vee hull. Deep-V and modified-V hulls cut through chop efficiently and are popular for fishing and general runabout use.

What is the fuel capacity of the Custom Weld 19 ft. Viper Series?

The Custom Weld 19 ft. Viper Series carries a 38-gallon fuel tank. Actual range depends on motor choice, load, and conditions.

Who makes the Custom Weld 19 ft. Viper Series?

The Custom Weld 19 ft. Viper Series is manufactured by Custom Weld. Browse the full Custom Weld spec catalogue to compare other models from the same range.