Xpress AWD18 2013 boat specs
Xpress
Xpress AWD18 2013
2013
View full specs →
VS
Xpress Yukon 18 2010 boat specs
Xpress
Xpress Yukon 18 2010
2010
View full specs →

Xpress AWD18 2013 vs Xpress Yukon 18 2010: Same Brand, Different Boat

The Xpress AWD18 2013 is a flat-bottom design and the Xpress Yukon 18 2010 is a deep-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Xpress AWD18 2013 at 18,0 ft versus Xpress Yukon 18 2010 at 18,0 ft. Weight tells a clearer story for trailering families: the Xpress Yukon 18 2010 tips the scales at 1 215 lbs - 465 lbs less than the Xpress AWD18 2013 at 750 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 115 hp, the Xpress Yukon 18 2010 has a 45-hp advantage over the Xpress AWD18 2013's 70-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Xpress Yukon 18 2010 is rated for 5 passengers, while the Xpress AWD18 2013 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Xpress Yukon 18 2010 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Xpress Yukon 18 2010 comes in at 11 lbs per hp versus 11 lbs per hp for the Xpress AWD18 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Xpress Yukon 18 2010 if your priority is putting more people on the water - it handles 5 passengers and at 18,0 ft it has the deck room to back that rating up comfortably. The Xpress AWD18 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeXpress
MakeXpress
ModelAWD18
ModelYukon 18
Model Year2013
Model Year2010
Measurements / Dimensions
Beam78 in.
Beam102 in.
Beam - Meters1.98
Beam - Meters2.59
Beam - Inches78
Beam - Inches102
Weight - Detail750 lbs.
Weight - Detail1,215 lbs.
Weight - kg340.19
Weight - kg551.11
Weight - lbs.750
Weight - lbs.1215
Width [transom] - DetailBottom: 51 in.
Width [transom] - Detail80 in.
Height - DetailSides: 24 in.
Height - Detail31 in.
Height - Meters0.61
Height - Meters0.79
Height - Inches24
Height - Inches31
Height [transom]21 in.
Height [transom]21 in.
Length - Feet18
Length - Feet18
Length overall - Detail18 ft.
Length overall - Detail18 ft. 0 in.
Length overall - Meters5.49
Length overall - Meters5.49
Length overall - Inches216
Length overall - Inches216
Deadrisenot available
Deadrise15°
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in.
Hull thickness0.125 in.
Hull typeFlat
Hull typeDeep Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Engine max70 hp
Engine max115 - 150 hp (higher hp rating required BayStar or SeaStar hydraulic steering option)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail30 gal.
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters113.56
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal30
Drive typenot available
Drive typeOutboard
Operational Info
Maximum capacity1,124 lbs.
Maximum capacity1,550 lbs.
Maximum people4 / 564 lbs.
Maximum people5 / 705 lbs.
Trailer Info
Trailer - DetailBacktrack AWB18
Trailer - Detailnot available
Trailer - Length over allnot available
Trailer - Length over all21 ft. 0 in. (includes trailer and engine)

Xpress AWD18 2013 vs Xpress Yukon 18 2010 - Common Questions

Which is the larger boat - the Xpress AWD18 2013 or the Xpress Yukon 18 2010?
The Xpress Yukon 18 2010 is the longer of the two at 18,0 feet overall. The Xpress AWD18 2013 comes in at 18,0 feet, making it roughly 0,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Xpress AWD18 2013 or the Xpress Yukon 18 2010?
For trailering, the Xpress AWD18 2013 has the edge at 750 lbs dry weight versus 1 215 lbs for the Xpress Yukon 18 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Xpress Yukon 18 2010 is rated to a maximum of 115 hp, giving it the larger power ceiling. The Xpress AWD18 2013 tops out at 70 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Xpress AWD18 2013 is Coast Guard rated for 4 passengers, while the Xpress Yukon 18 2010 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Xpress Yukon 18 2010 has a better power-to-weight ratio at 11 lbs per hp compared to 11 lbs per hp for the Xpress AWD18 2013. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Xpress Yukon 18 2010 measures 102" wide, compared to 78" for the Xpress AWD18 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Xpress AWD18 2013 and Xpress Yukon 18 2010 from the same manufacturer?
Yes - both the Xpress AWD18 2013 and the Xpress Yukon 18 2010 are built by Xpress. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.