The X-Yachts X-372 Mast head rigging Mast head rigging 1987 vs X-Yachts X-46 Standard Standard 2003 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
Size is the most obvious dividing line here. The X-Yachts X-46 Standard Standard 2003 measures 46,0 feet overall (2003), giving it roughly 8,2 additional feet of deck space compared to the X-Yachts X-372 Mast head rigging Mast head rigging 1987 at 37,8 feet (1987). Weight tells a clearer story for trailering families: the X-Yachts X-46 Standard Standard 2003 tips the scales at 22 928 lbs — 11 684 lbs less than the X-Yachts X-372 Mast head rigging Mast head rigging 1987 at 11 244 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The X-Yachts X-46 Standard Standard 2003 tops out at 75 hp. Engine specs for the X-Yachts X-372 Mast head rigging Mast head rigging 1987 aren't listed — confirm with a dealer before selecting an outboard.
For family outings this is probably the sharpest distinction between the two. The X-Yachts X-46 Standard Standard 2003 is rated for 14 passengers, while the X-Yachts X-372 Mast head rigging Mast head rigging 1987 caps at 11. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the X-Yachts X-46 Standard Standard 2003 could be the deciding factor.
Displacement is where these two sailboats genuinely part ways. The X-Yachts X-46 Standard Standard 2003 displaces 22 928 lbs — a 11 684-lb difference over the X-Yachts X-372 Mast head rigging Mast head rigging 1987 at 11 244 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.
Both boats draw a similar depth — 6,7 ft and 6,1 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.
The X-Yachts X-372 Mast head rigging Mast head rigging 1987 uses Sloop rigging. Helm style differs too: the X-Yachts X-372 Mast head rigging Mast head rigging 1987 uses a 1 tiller (helm wheel in option) versus a 1 wheel on the X-Yachts X-46 Standard Standard 2003. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. The X-Yachts X-46 Standard Standard 2003 has a documented auxiliary engine of 75 hp.
Hull speed is rated at 8,5 knots for the X-Yachts X-46 Standard Standard 2003 and 7,3 knots for the X-Yachts X-372 Mast head rigging Mast head rigging 1987.
Bottom line: The X-Yachts X-46 Standard Standard 2003 is the offshore and bluewater choice — at 22 928 lbs displacement and 46 ft it has the load capacity, range, and seakeeping for extended passages. The X-Yachts X-372 Mast head rigging Mast head rigging 1987 at 11 244 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.