The X-Yachts X-372 Fractional rigging Fractional rigging 1987 vs X-Yachts X-50 Standard Standard 2004 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
Size is the most obvious dividing line here. The X-Yachts X-50 Standard Standard 2004 measures 50,0 feet overall (2004), giving it roughly 12,2 additional feet of deck space compared to the X-Yachts X-372 Fractional rigging Fractional rigging 1987 at 37,8 feet (1987). Weight tells a clearer story for trailering families: the X-Yachts X-50 Standard Standard 2004 tips the scales at 27 337 lbs — 16 093 lbs less than the X-Yachts X-372 Fractional rigging Fractional rigging 1987 at 11 244 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 75 hp, the X-Yachts X-50 Standard Standard 2004 has a 47-hp advantage over the X-Yachts X-372 Fractional rigging Fractional rigging 1987's 28-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
For family outings this is probably the sharpest distinction between the two. The X-Yachts X-50 Standard Standard 2004 is rated for 15 passengers, while the X-Yachts X-372 Fractional rigging Fractional rigging 1987 caps at 11. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the X-Yachts X-50 Standard Standard 2004 could be the deciding factor.
Displacement is where these two sailboats genuinely part ways. The X-Yachts X-50 Standard Standard 2004 displaces 27 337 lbs — a 16 093-lb difference over the X-Yachts X-372 Fractional rigging Fractional rigging 1987 at 11 244 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.
Draft is a practical consideration that many buyers underestimate until they're already at the marina. The X-Yachts X-50 Standard Standard 2004 draws 9,1 ft, compared to 6,7 ft for the X-Yachts X-372 Fractional rigging Fractional rigging 1987. That 2,4-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.
The X-Yachts X-372 Fractional rigging Fractional rigging 1987 uses Sloop rigging. Helm style differs too: the X-Yachts X-372 Fractional rigging Fractional rigging 1987 uses a 1 tiller (helm wheel in option) versus a 2 wheels on the X-Yachts X-50 Standard Standard 2004. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. For auxiliary power the X-Yachts X-50 Standard Standard 2004 carries a 75-hp engine against 28 hp on the X-Yachts X-372 Fractional rigging Fractional rigging 1987. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.
Hull speed is rated at 8,8 knots for the X-Yachts X-50 Standard Standard 2004 and 7,3 knots for the X-Yachts X-372 Fractional rigging Fractional rigging 1987.
Bottom line: The X-Yachts X-50 Standard Standard 2004 is the offshore and bluewater choice — at 27 337 lbs displacement and 50 ft it has the load capacity, range, and seakeeping for extended passages. The X-Yachts X-372 Fractional rigging Fractional rigging 1987 at 11 244 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.