WeldBilt 89 in. Beam 2010 boat specs
WeldBilt
WeldBilt 89 in. Beam 2010
2010
View full specs →
VS
WeldBilt 96 in. Beam 2012 boat specs
WeldBilt
WeldBilt 96 in. Beam 2012
2012
View full specs →

WeldBilt 89 in. Beam 2010 vs WeldBilt 96 in. Beam 2012: A Close Look at Two Flat-Bottom Boats

Both the WeldBilt 89 in. Beam 2010 and the WeldBilt 96 in. Beam 2012 are flat-bottom designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department - WeldBilt 89 in. Beam 2010 at 16,0 ft versus WeldBilt 96 in. Beam 2012 at 17,0 ft. Weight tells a clearer story for trailering families: the WeldBilt 96 in. Beam 2012 tips the scales at 620 lbs - 106 lbs less than the WeldBilt 89 in. Beam 2010 at 514 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Bottom line: The WeldBilt 89 in. Beam 2010 and WeldBilt 96 in. Beam 2012 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeWeldBilt
MakeWeldBilt
Model89 in. Beam
Model96 in. Beam
Model Year2010
Model Year2012
Measurements / Dimensions
Beam89 in.
Beam96 in.
Beam - Meters2.26
Beam - Meters2.44
Beam - Inches89
Beam - Inches96
Weight - Detail514 lbs.
Weight - Detail620 lbs.
Weight - kg233.15
Weight - kg281.23
Weight - lbs.514
Weight - lbs.620
Height - Detail28 in.
Height - Detail29 in.
Height - Meters0.71
Height - Meters0.74
Height - Inches28
Height - Inches29
Length - Feet16
Length - Feet17
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in.
Hull thickness0.100 in.
Hull typeFlat
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard

WeldBilt 89 in. Beam 2010 vs WeldBilt 96 in. Beam 2012 - Common Questions

Which is the larger boat - the WeldBilt 89 in. Beam 2010 or the WeldBilt 96 in. Beam 2012?
The WeldBilt 96 in. Beam 2012 is the longer of the two at 17,0 feet overall. The WeldBilt 89 in. Beam 2010 comes in at 16,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the WeldBilt 89 in. Beam 2010 or the WeldBilt 96 in. Beam 2012?
For trailering, the WeldBilt 89 in. Beam 2010 has the edge at 514 lbs dry weight versus 620 lbs for the WeldBilt 96 in. Beam 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat is wider, and does it affect trailering?
The WeldBilt 96 in. Beam 2012 measures 96" wide, compared to 89" for the WeldBilt 89 in. Beam 2010. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the WeldBilt 89 in. Beam 2010 and WeldBilt 96 in. Beam 2012 from the same manufacturer?
Yes - both the WeldBilt 89 in. Beam 2010 and the WeldBilt 96 in. Beam 2012 are built by WeldBilt. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.