WeldBilt 72 in. Beam 2012 boat specs
WeldBilt
WeldBilt 72 in. Beam 2012
2012
View full specs →
VS
WeldBilt 89 in. Beam 2012 boat specs
WeldBilt
WeldBilt 89 in. Beam 2012
2012
View full specs →

WeldBilt 72 in. Beam 2012 vs WeldBilt 89 in. Beam 2012 — A Close Look at Two Flats

When two boats share the same hull type — in this case both the WeldBilt 72 in. Beam 2012 and the WeldBilt 89 in. Beam 2012 are flat designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — WeldBilt 72 in. Beam 2012 at 15,0 ft versus WeldBilt 89 in. Beam 2012 at 16,0 ft. Weight tells a clearer story for trailering families: the WeldBilt 89 in. Beam 2012 tips the scales at 514 lbs — 480 lbs less than the WeldBilt 72 in. Beam 2012 at 34 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Bottom line: The WeldBilt 72 in. Beam 2012 and WeldBilt 89 in. Beam 2012 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeWeldBilt
MakeWeldBilt
Model72 in. Beam
Model89 in. Beam
Model Year2012
Model Year2012
Measurements / Dimensions
Beam72 in
Beam89 in
Beam - Meters1.83
Beam - Meters2.26
Beam - Inches72
Beam - Inches89
Weight - Detail340 lbs
Weight - Detail514 lbs
Weight - kg154.22
Weight - kg233.15
Weight - lbs.34
Weight - lbs.514
Height - Detail20 in
Height - Detail28 in
Height - Meters0.51
Height - Meters0.71
Height - Inches2
Height - Inches28
Length - Feet15
Length - Feet16
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.80 or 0.100 in
Hull thickness0.100 in
Hull typeFlat
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard

WeldBilt 72 in. Beam 2012 vs WeldBilt 89 in. Beam 2012 — Common Questions

Which is the larger boat — the WeldBilt 72 in. Beam 2012 or the WeldBilt 89 in. Beam 2012?
The WeldBilt 89 in. Beam 2012 is the longer of the two at 16,0 feet overall. The WeldBilt 72 in. Beam 2012 comes in at 15,0 feet, making it roughly 1,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the WeldBilt 72 in. Beam 2012 or the WeldBilt 89 in. Beam 2012?
For trailering, the WeldBilt 72 in. Beam 2012 has the edge at 34 lbs dry weight versus 514 lbs for the WeldBilt 89 in. Beam 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat is wider, and does it affect trailering?
The WeldBilt 89 in. Beam 2012 measures 89" wide, compared to 72" for the WeldBilt 72 in. Beam 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the WeldBilt 72 in. Beam 2012 and WeldBilt 89 in. Beam 2012 from the same manufacturer?
Yes — both the WeldBilt 72 in. Beam 2012 and the WeldBilt 89 in. Beam 2012 are built by WeldBilt. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.