WeldBilt 68 in. Beam 2012 boat specs
WeldBilt
WeldBilt 68 in. Beam 2012
2012
View full specs →
VS
WeldBilt 77 in. Beam 2012 boat specs
WeldBilt
WeldBilt 77 in. Beam 2012
2012
View full specs →

WeldBilt 68 in. Beam 2012 vs WeldBilt 77 in. Beam 2012: Which Flat-Bottom Boat Fits Your Needs?

Both the WeldBilt 68 in. Beam 2012 and the WeldBilt 77 in. Beam 2012 are flat-bottom designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

Size is the most obvious dividing line here. The WeldBilt 77 in. Beam 2012 measures 16,0 feet overall (2012), giving it roughly 4,0 additional feet of deck space compared to the WeldBilt 68 in. Beam 2012 at 12,0 feet (2012). Weight tells a clearer story for trailering families: the WeldBilt 77 in. Beam 2012 tips the scales at 410 lbs - 170 lbs less than the WeldBilt 68 in. Beam 2012 at 240 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Bottom line: The WeldBilt 77 in. Beam 2012 at 16,0 ft is the right call if deck space, comfort, and entertaining are top of your list. The WeldBilt 68 in. Beam 2012 at 12,0 ft wins on trailering ease, likely lower purchase price, and simpler docking - a solid choice for a buyer who wants more boat for less money.
General Boat Info
MakeWeldBilt
MakeWeldBilt
Model68 in. Beam
Model77 in. Beam
Model Year2012
Model Year2012
Measurements / Dimensions
Beam68 in.
Beam77 in.
Beam - Meters1.73
Beam - Meters1.96
Beam - Inches68
Beam - Inches77
Weight - Detail240 lbs.
Weight - Detail410 lbs.
Weight - kg108.86
Weight - kg185.97
Weight - lbs.240
Weight - lbs.410
Height - Detail20 in.
Height - Detail24 in.
Height - Meters0.51
Height - Meters0.61
Height - Inches20
Height - Inches24
Length - Feet12
Length - Feet16
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.80 or 0.100 in.
Hull thickness0.100 in.
Hull typeFlat
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard

WeldBilt 68 in. Beam 2012 vs WeldBilt 77 in. Beam 2012 - Common Questions

Which is the larger boat - the WeldBilt 68 in. Beam 2012 or the WeldBilt 77 in. Beam 2012?
The WeldBilt 77 in. Beam 2012 is the longer of the two at 16,0 feet overall. The WeldBilt 68 in. Beam 2012 comes in at 12,0 feet, making it roughly 4,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the WeldBilt 68 in. Beam 2012 or the WeldBilt 77 in. Beam 2012?
For trailering, the WeldBilt 68 in. Beam 2012 has the edge at 240 lbs dry weight versus 410 lbs for the WeldBilt 77 in. Beam 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat is wider, and does it affect trailering?
The WeldBilt 77 in. Beam 2012 measures 77" wide, compared to 68" for the WeldBilt 68 in. Beam 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the WeldBilt 68 in. Beam 2012 and WeldBilt 77 in. Beam 2012 from the same manufacturer?
Yes - both the WeldBilt 68 in. Beam 2012 and the WeldBilt 77 in. Beam 2012 are built by WeldBilt. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.