Weld-Craft UVCDS 60 (18 ft.) 2010 vs Weldcraft Marine Angler SE 2006 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft UVCDS 60 (18 ft.) 2010 or the Weldcraft Marine Angler SE 2006?

The Weld-Craft UVCDS 60 (18 ft.) 2010 is the longer of the two at 18,0 feet overall. The Weldcraft Marine Angler SE 2006 comes in at 17,0 feet, making it roughly 1,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which boat can handle a bigger outboard?

The Weldcraft Marine Angler SE 2006 is rated to a maximum of 115 hp, giving it the larger power ceiling. The Weld-Craft UVCDS 60 (18 ft.) 2010 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Weld-Craft UVCDS 60 (18 ft.) 2010 is Coast Guard rated for 5 passengers, while the Weldcraft Marine Angler SE 2006 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Weld-Craft UVCDS 60 (18 ft.) 2010 measures 84" wide, compared to 82" for the Weldcraft Marine Angler SE 2006. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Weld-Craft UVCDS 60 (18 ft.) 2010 and Weldcraft Marine Angler SE 2006 from the same manufacturer?

Yes — both the Weld-Craft UVCDS 60 (18 ft.) 2010 and the Weldcraft Marine Angler SE 2006 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft UVCDS 60 (18 ft.) 2010 vs Weldcraft Marine Angler SE 2006

Weld-Craft

Weld-Craft UVCDS 60 (18 ft.) 2010

2010

View full specs →

Weld-Craft

Weldcraft Marine Angler SE 2006

2006

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft UVCDS 60 (18 ft.) 2010 vs Weldcraft Marine Angler SE 2006 — Same Brand, Different Boat

The Weld-Craft UVCDS 60 (18 ft.) 2010 vs Weldcraft Marine Angler SE 2006 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The power gap is worth calling out. Rated to 115 hp, the Weldcraft Marine Angler SE 2006 has a 75-hp advantage over the Weld-Craft UVCDS 60 (18 ft.) 2010's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Weldcraft Marine Angler SE 2006 and its 115-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weld-Craft UVCDS 60 (18 ft.) 2010 with its 40-hp rating is the more economical daily driver.

General Boat Info

MakeWeld-Craft

MakeWeldcraft Marine

ModelUVCDS 60 (18 ft.)

ModelAngler SE

Model Year201

Model Year2006

Measurements / Dimensions

Beam84 in

Beam82 in

Beam - Meters2.13

Beam - Meters2.08

Beam - Inches84

Beam - Inches82

Height - DetailSide: 26 in

Height - Detailnot available

Height - Meters0.66

Height - Metersnot available

Height - Inches26

Height - Inchesnot available

Length - Feet18

Length - Feet17

Length overall - Detail18 ft. 0 in

Length overall - Detail17 ft. 3 in

Length overall - Meters5.49

Length overall - Meters5.26

Length overall - Inches216

Length overall - Inches207

Deadrisenot available

Deadrise10℃

Weight - Detailnot available

Weight - Detail975 lbs

Weight - kgnot available

Weight - kg442.25

Weight - lbs.not available

Weight - lbs.975

Length - Inchesnot available

Length - Inches3

Body / Hull

Hull materialAluminum

Hull materialnot available

Hull typeFlat

Hull typenot available

Engine and Drivetrain

Fuel typeGas

Drive typeNone

Drive typeJet Drive

Engine max40 hp (manual)

Engine maxOutboard Jet: 115 hp Prop: 90 hp

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail21 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters79.49

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal21

Operational Info

Maximum capacitynot available

Maximum capacity1,300 lbs

Maximum peoplenot available

Maximum people5

Weld-Craft UVCDS 60 (18 ft.) 2010 vs Weldcraft Marine Angler SE 2006 — Common Questions

Which is the larger boat — the Weld-Craft UVCDS 60 (18 ft.) 2010 or the Weldcraft Marine Angler SE 2006?

The Weld-Craft UVCDS 60 (18 ft.) 2010 is the longer of the two at 18,0 feet overall. The Weldcraft Marine Angler SE 2006 comes in at 17,0 feet, making it roughly 1,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which boat can handle a bigger outboard?

The Weldcraft Marine Angler SE 2006 is rated to a maximum of 115 hp, giving it the larger power ceiling. The Weld-Craft UVCDS 60 (18 ft.) 2010 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Weld-Craft UVCDS 60 (18 ft.) 2010 is Coast Guard rated for 5 passengers, while the Weldcraft Marine Angler SE 2006 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Weld-Craft UVCDS 60 (18 ft.) 2010 measures 84" wide, compared to 82" for the Weldcraft Marine Angler SE 2006. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Weld-Craft UVCDS 60 (18 ft.) 2010 and Weldcraft Marine Angler SE 2006 from the same manufacturer?

Yes — both the Weld-Craft UVCDS 60 (18 ft.) 2010 and the Weldcraft Marine Angler SE 2006 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft UVCDS 60 (18 ft.) 2010 full specs ← Weldcraft Marine Angler SE 2006 full specs