Weld-Craft RS 60 (20 ft.) 2008 vs Weldcraft Marine 20 2010 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft RS 60 (20 ft.) 2008 or the Weldcraft Marine 20 2010?

The Weldcraft Marine 20 2010 is the longer of the two at 2,0 feet overall. The Weld-Craft RS 60 (20 ft.) 2008 comes in at 2,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: What is the maximum horsepower rating for these boats?

The Weld-Craft RS 60 (20 ft.) 2008 has a documented max rating of 40 hp. Engine specifications for the Weldcraft Marine 20 2010 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many people can each boat hold?

The Weld-Craft RS 60 (20 ft.) 2008 is Coast Guard rated for 6 passengers, while the Weldcraft Marine 20 2010 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Weldcraft Marine 20 2010 measures 86" wide, compared to 84" for the Weld-Craft RS 60 (20 ft.) 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Weld-Craft RS 60 (20 ft.) 2008 and Weldcraft Marine 20 2010 from the same manufacturer?

Yes — both the Weld-Craft RS 60 (20 ft.) 2008 and the Weldcraft Marine 20 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft RS 60 (20 ft.) 2008 vs Weldcraft Marine 20 2010

Weld-Craft

Weld-Craft RS 60 (20 ft.) 2008

2008

View full specs →

Weld-Craft

Weldcraft Marine 20 2010

2010

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft RS 60 (20 ft.) 2008 vs Weldcraft Marine 20 2010 — Same Brand, Different Boat

Matching a flat Weld-Craft RS 60 (20 ft.) 2008 against a deep vee Weldcraft Marine 20 2010 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The Weld-Craft RS 60 (20 ft.) 2008 carries a rated maximum of 40 hp. Engine data for the Weldcraft Marine 20 2010 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.

Both boats are rated for 6 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Weld-Craft RS 60 (20 ft.) 2008 and Weldcraft Marine 20 2010 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.

General Boat Info

MakeWeld-Craft

MakeWeldcraft Marine

ModelRS 60 (20 ft.)

Model2

Model Year2008

Model Year201

Measurements / Dimensions

Beam84 in

Beam86 in

Beam - Meters2.13

Beam - Meters2.18

Beam - Inches84

Beam - Inches86

Height - DetailSide: 26 in

Height - DetailSides: 30 x 0.125 in

Height - Meters0.66

Height - Meters0

Height - Inches26

Height - Inches0.125

Length - Feet2

Length overall - Detail20 ft. 0 in

Length overall - Meters6.1

Length overall - Inches24

Deadrisenot available

Deadrise22.5° bow entry 16° forward entry 14° transom

Weight - Detailnot available

Weight - Detail2,500 lbs

Weight - kgnot available

Weight - kg1133.98

Weight - lbs.not available

Weight - lbs.25

Width [transom] - Detailnot available

Width [transom] - Detail86 x 0.160 in

Body / Hull

Hull materialAluminum

Hull typeFlat

Hull typeDeep Vee

Engine and Drivetrain

Fuel typeGas

Drive typeNone

Drive typeJet Drive

Engine max40 hp (manual)

Engine maxnot available

Engine modelnot available

Engine modelMarine Power 5.0 V-8 carb

Jet pumpnot available

Jet pumpAmerican Turbine SD-309

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail62 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters234.7

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal62

Operational Info

Maximum capacitynot available

Maximum capacity1,300 lbs

Maximum peoplenot available

Maximum people6 / 980 lbs

Weld-Craft RS 60 (20 ft.) 2008 vs Weldcraft Marine 20 2010 — Common Questions

Which is the larger boat — the Weld-Craft RS 60 (20 ft.) 2008 or the Weldcraft Marine 20 2010?

The Weldcraft Marine 20 2010 is the longer of the two at 2,0 feet overall. The Weld-Craft RS 60 (20 ft.) 2008 comes in at 2,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

What is the maximum horsepower rating for these boats?

The Weld-Craft RS 60 (20 ft.) 2008 has a documented max rating of 40 hp. Engine specifications for the Weldcraft Marine 20 2010 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many people can each boat hold?

The Weld-Craft RS 60 (20 ft.) 2008 is Coast Guard rated for 6 passengers, while the Weldcraft Marine 20 2010 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Weldcraft Marine 20 2010 measures 86" wide, compared to 84" for the Weld-Craft RS 60 (20 ft.) 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Weld-Craft RS 60 (20 ft.) 2008 and Weldcraft Marine 20 2010 from the same manufacturer?

Yes — both the Weld-Craft RS 60 (20 ft.) 2008 and the Weldcraft Marine 20 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft RS 60 (20 ft.) 2008 full specs ← Weldcraft Marine 20 2010 full specs