Weld-Craft RL 70 (20 ft.) 2010 boat specs
Weld-Craft
Weld-Craft RL 70 (20 ft.) 2010
2010
View full specs →
VS
Weld-Craft Stick 2013 boat specs
Weld-Craft
Weld-Craft Stick 2013
2013
View full specs →

Weld-Craft RL 70 (20 ft.) 2010 vs Weld-Craft Stick 2013 — Same Brand, Different Boat

Matching a flat Weld-Craft RL 70 (20 ft.) 2010 against a modified vee Weld-Craft Stick 2013 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

Both boats share a closely matched power ceiling — 40 hp for the Weld-Craft RL 70 (20 ft.) 2010 and 40 hp for the Weld-Craft Stick 2013. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Weld-Craft RL 70 (20 ft.) 2010 is rated for 6 passengers, while the Weld-Craft Stick 2013 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Weld-Craft RL 70 (20 ft.) 2010 could be the deciding factor.

Bottom line: Choose the Weld-Craft RL 70 (20 ft.) 2010 if your priority is putting more people on the water — it handles 6 passengers and at 2,0 ft it has the deck room to back that rating up comfortably. The Weld-Craft Stick 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
ModelRL 70 (20 ft.)
ModelStick
Model Year201
Model Year2013
Measurements / Dimensions
Beam94 in
Beam66 in
Beam - Meters2.39
Beam - Meters1.68
Beam - Inches94
Beam - Inches66
Height - DetailSide: 26 in
Height - Detail22 in. side
Height - Meters0.66
Height - Meters0.56
Height - Inches26
Height - Inches22
Length - Feet2
Length - Feet15
Length overall - Detail20 ft. 0 in
Length overall - Detail15 ft
Length overall - Meters6.1
Length overall - Meters4.57
Length overall - Inches24
Length overall - Inches18
Weight - Detailnot available
Weight - Detail500 lbs
Weight - kgnot available
Weight - kg226.8
Weight - lbs.not available
Weight - lbs.5
Width [transom] - Detailnot available
Width [transom] - Detail44 in. bottom
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeFlat
Hull typeModified Vee
Hull thicknessnot available
Hull thickness0.100 in
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeNone
Drive typeOutboard
Engine max40 hp (manual)
Engine maxnot available
Engine modelnot available
Engine model22 in. shaft
Horsepowernot available
Horsepower40 hp remote
Operational Info
Maximum capacitynot available
Maximum capacity850 lbs
Maximum peoplenot available
Maximum people3 / 423 lbs

Weld-Craft RL 70 (20 ft.) 2010 vs Weld-Craft Stick 2013 — Common Questions

Which is the larger boat — the Weld-Craft RL 70 (20 ft.) 2010 or the Weld-Craft Stick 2013?
The Weld-Craft Stick 2013 is the longer of the two at 15,0 feet overall. The Weld-Craft RL 70 (20 ft.) 2010 comes in at 2,0 feet, making it roughly 13,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
How many people can each boat hold?
The Weld-Craft RL 70 (20 ft.) 2010 is Coast Guard rated for 6 passengers, while the Weld-Craft Stick 2013 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weld-Craft RL 70 (20 ft.) 2010 measures 94" wide, compared to 66" for the Weld-Craft Stick 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft RL 70 (20 ft.) 2010 and Weld-Craft Stick 2013 from the same manufacturer?
Yes — both the Weld-Craft RL 70 (20 ft.) 2010 and the Weld-Craft Stick 2013 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.