Weld-Craft RL 60 (20 ft.) 2010 vs Weldcraft Marine 186 SD 2011 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft RL 60 (20 ft.) 2010 or the Weldcraft Marine 186 SD 2011?

The Weldcraft Marine 186 SD 2011 is the longer of the two at 18,5 feet overall. The Weld-Craft RL 60 (20 ft.) 2010 comes in at 2,0 feet, making it roughly 16,5 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which boat can handle a bigger outboard?

The Weldcraft Marine 186 SD 2011 is rated to a maximum of 200 hp, giving it the larger power ceiling. The Weld-Craft RL 60 (20 ft.) 2010 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Weld-Craft RL 60 (20 ft.) 2010 is Coast Guard rated for 6 passengers, while the Weldcraft Marine 186 SD 2011 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Weldcraft Marine 186 SD 2011 measures 98" wide, compared to 84" for the Weld-Craft RL 60 (20 ft.) 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Weld-Craft RL 60 (20 ft.) 2010 and Weldcraft Marine 186 SD 2011 from the same manufacturer?

Yes — both the Weld-Craft RL 60 (20 ft.) 2010 and the Weldcraft Marine 186 SD 2011 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft RL 60 (20 ft.) 2010 vs Weldcraft Marine 186 SD 2011

Weld-Craft

Weld-Craft RL 60 (20 ft.) 2010

2010

View full specs →

Weld-Craft

Weldcraft Marine 186 SD 2011

2011

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft RL 60 (20 ft.) 2010 vs Weldcraft Marine 186 SD 2011 — Same Brand, Different Boat

Matching a flat Weld-Craft RL 60 (20 ft.) 2010 against a deep vee Weldcraft Marine 186 SD 2011 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 200 hp, the Weldcraft Marine 186 SD 2011 has a 160-hp advantage over the Weld-Craft RL 60 (20 ft.) 2010's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 6 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Weldcraft Marine 186 SD 2011 at 18,5 ft is the right call if deck space, comfort, and entertaining are top of your list. The Weld-Craft RL 60 (20 ft.) 2010 at 2,0 ft wins on trailering ease, likely lower purchase price, and simpler docking — a solid choice for a buyer who wants more boat for less money.

General Boat Info

MakeWeld-Craft

MakeWeldcraft Marine

ModelRL 60 (20 ft.)

Model186 SD

Model Year201

Model Year2011

Measurements / Dimensions

Beam84 in

Beam98 in

Beam - Meters2.13

Beam - Meters2.49

Beam - Inches84

Beam - Inches98

Height - DetailSide: 26 in

Height - DetailSides: 33 x 0.125 in

Height - Meters0.66

Height - Meters0

Height - Inches26

Height - Inches0.125

Length - Feet2

Length - Feet18.5

Length overall - Detail20 ft. 0 in

Length overall - Detail18 ft. 6 in

Length overall - Meters6.1

Length overall - Meters5.64

Length overall - Inches24

Length overall - Inches222

Deadrisenot available

Deadrise28° bow entry 28° forward entry 18° transom

Weight - Detailnot available

Weight - DetailN/A

Width [transom] - Detailnot available

Width [transom] - Detail98 x 0.190 in

Body / Hull

Hull materialAluminum

Hull typeFlat

Hull typeDeep Vee

Engine and Drivetrain

Fuel typeGas

Drive typeNone

Drive typeOther

Engine max40 hp (manual)

Engine max200 hp

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail42 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters158.99

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal42

Operational Info

Maximum capacitynot available

Maximum capacity1,550 lbs

Maximum peoplenot available

Maximum people6 / 960 lbs

Weld-Craft RL 60 (20 ft.) 2010 vs Weldcraft Marine 186 SD 2011 — Common Questions

Which is the larger boat — the Weld-Craft RL 60 (20 ft.) 2010 or the Weldcraft Marine 186 SD 2011?

The Weldcraft Marine 186 SD 2011 is the longer of the two at 18,5 feet overall. The Weld-Craft RL 60 (20 ft.) 2010 comes in at 2,0 feet, making it roughly 16,5 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which boat can handle a bigger outboard?

The Weldcraft Marine 186 SD 2011 is rated to a maximum of 200 hp, giving it the larger power ceiling. The Weld-Craft RL 60 (20 ft.) 2010 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Weld-Craft RL 60 (20 ft.) 2010 is Coast Guard rated for 6 passengers, while the Weldcraft Marine 186 SD 2011 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Weldcraft Marine 186 SD 2011 measures 98" wide, compared to 84" for the Weld-Craft RL 60 (20 ft.) 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Weld-Craft RL 60 (20 ft.) 2010 and Weldcraft Marine 186 SD 2011 from the same manufacturer?

Yes — both the Weld-Craft RL 60 (20 ft.) 2010 and the Weldcraft Marine 186 SD 2011 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft RL 60 (20 ft.) 2010 full specs ← Weldcraft Marine 186 SD 2011 full specs