Weld-Craft RL 60 (20 ft.) 2009 vs Weldcraft Marine 220 SD 2011 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft RL 60 (20 ft.) 2009 or the Weldcraft Marine 220 SD 2011?

The Weldcraft Marine 220 SD 2011 is the longer of the two at 22,0 feet overall. The Weld-Craft RL 60 (20 ft.) 2009 comes in at 2,0 feet, making it roughly 20,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: What is the maximum horsepower rating for these boats?

The Weld-Craft RL 60 (20 ft.) 2009 has a documented max rating of 40 hp. Engine specifications for the Weldcraft Marine 220 SD 2011 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many people can each boat hold?

The Weld-Craft RL 60 (20 ft.) 2009 is Coast Guard rated for 6 passengers, while the Weldcraft Marine 220 SD 2011 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Weldcraft Marine 220 SD 2011 measures 102" wide, compared to 84" for the Weld-Craft RL 60 (20 ft.) 2009. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Weld-Craft RL 60 (20 ft.) 2009 and Weldcraft Marine 220 SD 2011 from the same manufacturer?

Yes — both the Weld-Craft RL 60 (20 ft.) 2009 and the Weldcraft Marine 220 SD 2011 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft RL 60 (20 ft.) 2009 vs Weldcraft Marine 220 SD 2011

Weld-Craft

Weld-Craft RL 60 (20 ft.) 2009

2009

View full specs →

Weld-Craft

Weldcraft Marine 220 SD 2011

2011

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft RL 60 (20 ft.) 2009 vs Weldcraft Marine 220 SD 2011 — Same Brand, Different Boat

Matching a flat Weld-Craft RL 60 (20 ft.) 2009 against a deep vee Weldcraft Marine 220 SD 2011 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The Weld-Craft RL 60 (20 ft.) 2009 carries a rated maximum of 40 hp. Engine data for the Weldcraft Marine 220 SD 2011 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.

Both boats are rated for 6 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Weldcraft Marine 220 SD 2011 at 22,0 ft is the right call if deck space, comfort, and entertaining are top of your list. The Weld-Craft RL 60 (20 ft.) 2009 at 2,0 ft wins on trailering ease, likely lower purchase price, and simpler docking — a solid choice for a buyer who wants more boat for less money.

General Boat Info

MakeWeld-Craft

MakeWeldcraft Marine

ModelRL 60 (20 ft.)

Model220 SD

Model Year2009

Model Year2011

Measurements / Dimensions

Beam84 in

Beam102 in

Beam - Meters2.13

Beam - Meters2.59

Beam - Inches84

Beam - Inches102

Height - DetailSide: 26 in

Height - DetailSides: 39 x 0.125 in

Height - Meters0.66

Height - Meters0

Height - Inches26

Height - Inches0.125

Length - Feet2

Length - Feet22

Length overall - Detail20 ft. 0 in

Length overall - Detail22 ft. 0 in

Length overall - Meters6.1

Length overall - Meters6.71

Length overall - Inches24

Length overall - Inches264

Deadrisenot available

Deadrise32° bow entry 28° forward entry 18° transom

Weight - Detailnot available

Weight - DetailN/A

Width [transom] - Detailnot available

Width [transom] - Detail102 x 0.190 in

Body / Hull

Hull materialAluminum

Hull typeFlat

Hull typeDeep Vee

Engine and Drivetrain

Fuel typeGas

Drive typeNone

Drive typeOther

Engine max40 hp (manual)

Engine maxN/A

Engine modelnot available

Engine modelMerCruiser V6 4.3L carb

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail62 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters234.7

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal62

Weld-Craft RL 60 (20 ft.) 2009 vs Weldcraft Marine 220 SD 2011 — Common Questions

Which is the larger boat — the Weld-Craft RL 60 (20 ft.) 2009 or the Weldcraft Marine 220 SD 2011?

The Weldcraft Marine 220 SD 2011 is the longer of the two at 22,0 feet overall. The Weld-Craft RL 60 (20 ft.) 2009 comes in at 2,0 feet, making it roughly 20,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

What is the maximum horsepower rating for these boats?

The Weld-Craft RL 60 (20 ft.) 2009 has a documented max rating of 40 hp. Engine specifications for the Weldcraft Marine 220 SD 2011 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many people can each boat hold?

The Weld-Craft RL 60 (20 ft.) 2009 is Coast Guard rated for 6 passengers, while the Weldcraft Marine 220 SD 2011 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Weldcraft Marine 220 SD 2011 measures 102" wide, compared to 84" for the Weld-Craft RL 60 (20 ft.) 2009. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Weld-Craft RL 60 (20 ft.) 2009 and Weldcraft Marine 220 SD 2011 from the same manufacturer?

Yes — both the Weld-Craft RL 60 (20 ft.) 2009 and the Weldcraft Marine 220 SD 2011 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft RL 60 (20 ft.) 2009 full specs ← Weldcraft Marine 220 SD 2011 full specs