Weld-Craft RL 56 (16 ft.) 2010 boat specs
Weld-Craft
Weld-Craft RL 56 (16 ft.) 2010
2010
View full specs →
VS
Weldcraft Marine 240 Maverick DV 2013 boat specs
Weld-Craft
Weldcraft Marine 240 Maverick DV 2013
2013
View full specs →

Weld-Craft RL 56 (16 ft.) 2010 vs Weldcraft Marine 240 Maverick DV 2013 — Same Brand, Different Boat

Matching a flat Weld-Craft RL 56 (16 ft.) 2010 against a deep vee Weldcraft Marine 240 Maverick DV 2013 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 350 hp, the Weldcraft Marine 240 Maverick DV 2013 has a 315-hp advantage over the Weld-Craft RL 56 (16 ft.) 2010's 35-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Weldcraft Marine 240 Maverick DV 2013 is rated for 7 passengers, while the Weld-Craft RL 56 (16 ft.) 2010 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Weldcraft Marine 240 Maverick DV 2013 could be the deciding factor.

Bottom line: Choose the Weldcraft Marine 240 Maverick DV 2013 if your priority is putting more people on the water — it handles 7 passengers and at 26,0 ft it has the deck room to back that rating up comfortably. The Weld-Craft RL 56 (16 ft.) 2010 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeWeld-Craft
MakeWeldcraft Marine
ModelRL 56 (16 ft.)
Model240 Maverick DV
Model Year201
Model Year2013
Measurements / Dimensions
Beam78 in
Beam102 in
Beam - Meters1.98
Beam - Meters2.59
Beam - Inches78
Beam - Inches102
Height - DetailSide: 22 in
Height - DetailSides: 39 in
Height - Meters0.56
Height - Meters0.99
Height - Inches22
Height - Inches39
Length - Feet16
Length - Feet26
Length overall - Detail16 ft. 0 in
Length overall - Detail26 ft
Length overall - Meters4.88
Length overall - Meters7.92
Length overall - Inches192
Length overall - Inches312
Deadrisenot available
DeadriseBow: 28° Transom: 18°
Weight - Detailnot available
Weight - Detail2,400 lbs
Weight - kgnot available
Weight - kg1088.62
Weight - lbs.not available
Weight - lbs.24
Width [transom] - Detailnot available
Width [transom] - Detail102 in
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeFlat
Hull typeDeep Vee
Hull thicknessnot available
Hull thicknessBottom: 0.19 in. Sides: 0.125 in. Transom: 0.19 in
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeNone
Drive typeOutboard
Engine max35 hp (manual)
Engine max350 hp
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail62 gal
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters234.7
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal62

Weld-Craft RL 56 (16 ft.) 2010 vs Weldcraft Marine 240 Maverick DV 2013 — Common Questions

Which is the larger boat — the Weld-Craft RL 56 (16 ft.) 2010 or the Weldcraft Marine 240 Maverick DV 2013?
The Weldcraft Marine 240 Maverick DV 2013 is the longer of the two at 26,0 feet overall. The Weld-Craft RL 56 (16 ft.) 2010 comes in at 16,0 feet, making it roughly 10,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weldcraft Marine 240 Maverick DV 2013 is rated to a maximum of 350 hp, giving it the larger power ceiling. The Weld-Craft RL 56 (16 ft.) 2010 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Weld-Craft RL 56 (16 ft.) 2010 is Coast Guard rated for 4 passengers, while the Weldcraft Marine 240 Maverick DV 2013 is certified for 7. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weldcraft Marine 240 Maverick DV 2013 measures 102" wide, compared to 78" for the Weld-Craft RL 56 (16 ft.) 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft RL 56 (16 ft.) 2010 and Weldcraft Marine 240 Maverick DV 2013 from the same manufacturer?
Yes — both the Weld-Craft RL 56 (16 ft.) 2010 and the Weldcraft Marine 240 Maverick DV 2013 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.