Weld-Craft RL 48 (16 ft.) 2008 vs Weldcraft Marine 300 2010 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft RL 48 (16 ft.) 2008 or the Weldcraft Marine 300 2010?

The Weld-Craft RL 48 (16 ft.) 2008 is the longer of the two at 16,0 feet overall. The Weldcraft Marine 300 2010 comes in at 3,0 feet, making it roughly 13,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which boat can handle a bigger outboard?

The Weldcraft Marine 300 2010 is rated to a maximum of 640 hp, giving it the larger power ceiling. The Weld-Craft RL 48 (16 ft.) 2008 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Weld-Craft RL 48 (16 ft.) 2008 is Coast Guard rated for 4 passengers, while the Weldcraft Marine 300 2010 is certified for 9. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Weldcraft Marine 300 2010 measures 102" wide, compared to 7" for the Weld-Craft RL 48 (16 ft.) 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Weld-Craft RL 48 (16 ft.) 2008 and Weldcraft Marine 300 2010 from the same manufacturer?

Yes — both the Weld-Craft RL 48 (16 ft.) 2008 and the Weldcraft Marine 300 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft RL 48 (16 ft.) 2008 vs Weldcraft Marine 300 2010

Weld-Craft

Weld-Craft RL 48 (16 ft.) 2008

2008

View full specs →

Weld-Craft

Weldcraft Marine 300 2010

2010

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft RL 48 (16 ft.) 2008 vs Weldcraft Marine 300 2010 — Same Brand, Different Boat

Matching a flat Weld-Craft RL 48 (16 ft.) 2008 against a deep vee Weldcraft Marine 300 2010 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 640 hp, the Weldcraft Marine 300 2010 has a 605-hp advantage over the Weld-Craft RL 48 (16 ft.) 2008's 35-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Weldcraft Marine 300 2010 is rated for 9 passengers, while the Weld-Craft RL 48 (16 ft.) 2008 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Weldcraft Marine 300 2010 could be the deciding factor.

Bottom line: Choose the Weldcraft Marine 300 2010 if your priority is putting more people on the water — it handles 9 passengers and at 3,0 ft it has the deck room to back that rating up comfortably. The Weld-Craft RL 48 (16 ft.) 2008 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.

General Boat Info

MakeWeld-Craft

MakeWeldcraft Marine

ModelRL 48 (16 ft.)

Model3

Model Year2008

Model Year201

Measurements / Dimensions

Beam70 in

Beam102 in

Beam - Meters1.78

Beam - Meters2.59

Beam - Inches7

Beam - Inches102

Height - DetailSide: 22 in

Height - DetailSides: 39 x 0.160 5052-H32

Height - Meters0.56

Height - Meters0

Height - Inches22

Height - Inches0.16

Length - Feet16

Length - Feet3

Length overall - Detail16 ft. 0 in

Length overall - Detail30 ft

Length overall - Meters4.88

Length overall - Meters9.14

Length overall - Inches192

Length overall - Inches36

Deadrisenot available

Deadrise32° bow entry 28° forward entry 18° transom

Weight - Detailnot available

Weight - Detail4,275 lbs. (approximate)

Weight - kgnot available

Weight - kg1939.11

Weight - lbs.not available

Weight - lbs.4275

Width [transom] - Detailnot available

Width [transom] - Detail102 x 0.190 in

Body / Hull

Hull materialAluminum

Hull typeFlat

Hull typeDeep Vee

Engine and Drivetrain

Fuel typeGas

Fuel typeDiesel

Drive typeNone

Drive typeJet Drive

Engine max35 hp (manual)

Engine max640 hp

Engine makenot available

Engine makeYanmar

Engine modelnot available

Engine model6LY3-UTP

Jet pumpnot available

Jet pumpHamilton 274

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail160 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters605.67

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal16

Horsepowernot available

Horsepower38

Weld-Craft RL 48 (16 ft.) 2008 vs Weldcraft Marine 300 2010 — Common Questions

Which is the larger boat — the Weld-Craft RL 48 (16 ft.) 2008 or the Weldcraft Marine 300 2010?

The Weld-Craft RL 48 (16 ft.) 2008 is the longer of the two at 16,0 feet overall. The Weldcraft Marine 300 2010 comes in at 3,0 feet, making it roughly 13,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which boat can handle a bigger outboard?

The Weldcraft Marine 300 2010 is rated to a maximum of 640 hp, giving it the larger power ceiling. The Weld-Craft RL 48 (16 ft.) 2008 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Weld-Craft RL 48 (16 ft.) 2008 is Coast Guard rated for 4 passengers, while the Weldcraft Marine 300 2010 is certified for 9. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Weldcraft Marine 300 2010 measures 102" wide, compared to 7" for the Weld-Craft RL 48 (16 ft.) 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Weld-Craft RL 48 (16 ft.) 2008 and Weldcraft Marine 300 2010 from the same manufacturer?

Yes — both the Weld-Craft RL 48 (16 ft.) 2008 and the Weldcraft Marine 300 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft RL 48 (16 ft.) 2008 full specs ← Weldcraft Marine 300 2010 full specs