Weld-Craft Jon Boats 2011 boat specs
Weld-Craft
Weld-Craft Jon Boats 2011
2011
View full specs →
VS
Weld-Craft RS 52 (14 ft.) 2009 boat specs
Weld-Craft
Weld-Craft RS 52 (14 ft.) 2009
2009
View full specs →

Weld-Craft Jon Boats 2011 vs Weld-Craft RS 52 (14 ft.) 2009 — A Close Look at Two Flats

When two boats share the same hull type — in this case both the Weld-Craft Jon Boats 2011 and the Weld-Craft RS 52 (14 ft.) 2009 are flat designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

Both boats share a closely matched power ceiling — 15 hp for the Weld-Craft Jon Boats 2011 and 25 hp for the Weld-Craft RS 52 (14 ft.) 2009. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Bottom line: The Weld-Craft Jon Boats 2011 and Weld-Craft RS 52 (14 ft.) 2009 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
ModelJon Boats
ModelRS 52 (14 ft.)
Model Year2011
Model Year2009
Measurements / Dimensions
Beam59 in
Beam74 in
Beam - Meters1.5
Beam - Meters1.88
Beam - Inches59
Beam - Inches74
Width [transom] - Detail36 in
Width [transom] - Detailnot available
Height - Detail19 in. side
Height - DetailSide: 22 in
Height - Meters0.48
Height - Meters0.56
Height - Inches19
Height - Inches22
Height [transom]17 or 22 in
Height [transom]not available
Length - Feet12
Length - Feet14
Length overall - Detailnot available
Length overall - Detail14 ft. 0 in
Length overall - Metersnot available
Length overall - Meters4.27
Length overall - Inchesnot available
Length overall - Inches168
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.080 in
Hull thicknessnot available
Hull typeFlat
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeNone
Horsepower15 hp manual
Horsepowernot available
Engine maxnot available
Engine max25 hp (manual)

Weld-Craft Jon Boats 2011 vs Weld-Craft RS 52 (14 ft.) 2009 — Common Questions

Which is the larger boat — the Weld-Craft Jon Boats 2011 or the Weld-Craft RS 52 (14 ft.) 2009?
The Weld-Craft RS 52 (14 ft.) 2009 is the longer of the two at 14,0 feet overall. The Weld-Craft Jon Boats 2011 comes in at 12,0 feet, making it roughly 2,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft RS 52 (14 ft.) 2009 is rated to a maximum of 25 hp, giving it the larger power ceiling. The Weld-Craft Jon Boats 2011 tops out at 15 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many passengers can the Weld-Craft RS 52 (14 ft.) 2009 carry?
The Weld-Craft RS 52 (14 ft.) 2009 has an official capacity rating of 4 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.
Which boat is wider, and does it affect trailering?
The Weld-Craft RS 52 (14 ft.) 2009 measures 74" wide, compared to 59" for the Weld-Craft Jon Boats 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft Jon Boats 2011 and Weld-Craft RS 52 (14 ft.) 2009 from the same manufacturer?
Yes — both the Weld-Craft Jon Boats 2011 and the Weld-Craft RS 52 (14 ft.) 2009 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.