Weld-Craft Jon Boats 2011 boat specs
Weld-Craft
Weld-Craft Jon Boats 2011
2011
View full specs →
VS
Weld-Craft RL 36 (12 ft.) 2007 boat specs
Weld-Craft
Weld-Craft RL 36 (12 ft.) 2007
2007
View full specs →

Weld-Craft Jon Boats 2011 vs Weld-Craft RL 36 (12 ft.) 2007 — A Close Look at Two Flats

When two boats share the same hull type — in this case both the Weld-Craft Jon Boats 2011 and the Weld-Craft RL 36 (12 ft.) 2007 are flat designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

Both boats share a closely matched power ceiling — 15 hp for the Weld-Craft Jon Boats 2011 and 15 hp for the Weld-Craft RL 36 (12 ft.) 2007. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Bottom line: The Weld-Craft Jon Boats 2011 and Weld-Craft RL 36 (12 ft.) 2007 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
ModelJon Boats
ModelRL 36 (12 ft.)
Model Year2011
Model Year2007
Measurements / Dimensions
Beam59 in
Beam59 in
Beam - Meters1.5
Beam - Meters1.5
Beam - Inches59
Beam - Inches59
Width [transom] - Detail36 in
Width [transom] - Detailnot available
Height - Detail19 in. side
Height - DetailSide: 19 in
Height - Meters0.48
Height - Meters0.48
Height - Inches19
Height - Inches19
Height [transom]17 or 22 in
Height [transom]not available
Length - Feet12
Length - Feet12
Length overall - Detailnot available
Length overall - Detail12 ft. 0 in
Length overall - Metersnot available
Length overall - Meters3.66
Length overall - Inchesnot available
Length overall - Inches144
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.080 in
Hull thicknessnot available
Hull typeFlat
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeNone
Horsepower15 hp manual
Horsepowernot available
Engine maxnot available
Engine max15 hp (manual)

Weld-Craft Jon Boats 2011 vs Weld-Craft RL 36 (12 ft.) 2007 — Common Questions

Which is the larger boat — the Weld-Craft Jon Boats 2011 or the Weld-Craft RL 36 (12 ft.) 2007?
The Weld-Craft RL 36 (12 ft.) 2007 is the longer of the two at 12,0 feet overall. The Weld-Craft Jon Boats 2011 comes in at 12,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
How many passengers can the Weld-Craft RL 36 (12 ft.) 2007 carry?
The Weld-Craft RL 36 (12 ft.) 2007 has an official capacity rating of 3 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Weld-Craft Jon Boats 2011 and Weld-Craft RL 36 (12 ft.) 2007 share an 59 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the Weld-Craft Jon Boats 2011 and Weld-Craft RL 36 (12 ft.) 2007 from the same manufacturer?
Yes — both the Weld-Craft Jon Boats 2011 and the Weld-Craft RL 36 (12 ft.) 2007 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.