Weld-Craft Duck 2013 boat specs
Weld-Craft
Weld-Craft Duck 2013
2013
View full specs →
VS
Weldcraft Marine 240 Ocean King  2012 boat specs
Weld-Craft
Weldcraft Marine 240 Ocean King 2012
2012
View full specs →

Weld-Craft Duck 2013 vs Weldcraft Marine 240 Ocean King 2012: Same Brand, Different Boat

The Weld-Craft Duck 2013 is a modified-V design and the Weldcraft Marine 240 Ocean King 2012 is a deep-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

Size is the most obvious dividing line here. The Weldcraft Marine 240 Ocean King 2012 measures 26,0 feet overall (2012), giving it roughly 11,0 additional feet of deck space compared to the Weld-Craft Duck 2013 at 15,0 feet (2013). Weight tells a clearer story for trailering families: the Weldcraft Marine 240 Ocean King 2012 tips the scales at 3 325 lbs - 3 065 lbs less than the Weld-Craft Duck 2013 at 260 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 450 hp, the Weldcraft Marine 240 Ocean King 2012 has a 425-hp advantage over the Weld-Craft Duck 2013's 25-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Weldcraft Marine 240 Ocean King 2012 is rated for 7 passengers, while the Weld-Craft Duck 2013 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Weldcraft Marine 240 Ocean King 2012 could be the deciding factor.

Bottom line: Choose the Weldcraft Marine 240 Ocean King 2012 if your priority is putting more people on the water - it handles 7 passengers and at 26,0 ft it has the deck room to back that rating up comfortably. The Weld-Craft Duck 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeWeld-Craft
MakeWeldcraft Marine
ModelDuck
Model240 Ocean King
Model Year2013
Model Year2012
Measurements / Dimensions
Beam65 in.
Beam102 in.
Beam - Meters1.65
Beam - Meters2.59
Beam - Inches65
Beam - Inches102
Weight - Detail260 lbs.
Weight - Detail3,325 lbs.
Weight - kg117.93
Weight - kg1508.19
Weight - lbs.260
Weight - lbs.3325
Width [transom] - Detail42 in. bottom
Width [transom] - Detail102 in.
Height - Detail19 in. side
Height - DetailSides: 39 in.
Height - Meters0.48
Height - Meters0.99
Height - Inches19
Height - Inches39
Length - Feet15
Length - Feet26
Length overall - Detail15 ft.
Length overall - Detail26 ft.
Length overall - Meters4.57
Length overall - Meters7.92
Length overall - Inches180
Length overall - Inches312
Deadrisenot available
DeadriseBow: 28° Transom: 18°
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.080 in.
Hull thicknessBottom: 0.19 in. Sides: 0.125 in. Transom: 0.19 in.
Hull typeModified Vee
Hull typeDeep Vee
Engine and Drivetrain
Engine model17 in. shaft
Engine modelnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Horsepower25 hp manual
Horsepowernot available
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail127 gal.
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters480.75
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal127
Engine maxnot available
Engine max450 hp
Operational Info
Maximum capacity702 lbs.
Maximum capacitynot available
Maximum people4 / 564 lbs.
Maximum peoplenot available

Weld-Craft Duck 2013 vs Weldcraft Marine 240 Ocean King 2012 - Common Questions

Which is the larger boat - the Weld-Craft Duck 2013 or the Weldcraft Marine 240 Ocean King 2012?
The Weldcraft Marine 240 Ocean King 2012 is the longer of the two at 26,0 feet overall. The Weld-Craft Duck 2013 comes in at 15,0 feet, making it roughly 11,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Weld-Craft Duck 2013 or the Weldcraft Marine 240 Ocean King 2012?
For trailering, the Weld-Craft Duck 2013 has the edge at 260 lbs dry weight versus 3 325 lbs for the Weldcraft Marine 240 Ocean King 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Weldcraft Marine 240 Ocean King 2012 is rated to a maximum of 450 hp, giving it the larger power ceiling. The Weld-Craft Duck 2013 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Weld-Craft Duck 2013 is Coast Guard rated for 4 passengers, while the Weldcraft Marine 240 Ocean King 2012 is certified for 7. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weldcraft Marine 240 Ocean King 2012 measures 102" wide, compared to 65" for the Weld-Craft Duck 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft Duck 2013 and Weldcraft Marine 240 Ocean King 2012 from the same manufacturer?
Yes - both the Weld-Craft Duck 2013 and the Weldcraft Marine 240 Ocean King 2012 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.