Weld-Craft CLT 60 (20 ft.) 2009 boat specs
Weld-Craft
Weld-Craft CLT 60 (20 ft.) 2009
2009
View full specs →
VS
Weldcraft Marine 300 Ocean King 2013 boat specs
Weld-Craft
Weldcraft Marine 300 Ocean King 2013
2013
View full specs →

Weld-Craft CLT 60 (20 ft.) 2009 vs Weldcraft Marine 300 Ocean King 2013 — Same Brand, Different Boat

Matching a flat Weld-Craft CLT 60 (20 ft.) 2009 against a deep vee Weldcraft Marine 300 Ocean King 2013 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 500 hp, the Weldcraft Marine 300 Ocean King 2013 has a 460-hp advantage over the Weld-Craft CLT 60 (20 ft.) 2009's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Weldcraft Marine 300 Ocean King 2013 is rated for 9 passengers, while the Weld-Craft CLT 60 (20 ft.) 2009 caps at 6. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Weldcraft Marine 300 Ocean King 2013 could be the deciding factor.

Bottom line: Choose the Weldcraft Marine 300 Ocean King 2013 if your priority is putting more people on the water — it handles 9 passengers and at 32,0 ft it has the deck room to back that rating up comfortably. The Weld-Craft CLT 60 (20 ft.) 2009 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 6 that costs less to run day-to-day.
General Boat Info
MakeWeld-Craft
MakeWeldcraft Marine
ModelCLT 60 (20 ft.)
Model300 Ocean King
Model Year2009
Model Year2013
Measurements / Dimensions
Beam84 in
Beam102 in
Beam - Meters2.13
Beam - Meters2.59
Beam - Inches84
Beam - Inches102
Height - DetailSide: 26 in
Height - DetailSides: 39 in
Height - Meters0.66
Height - Meters0.99
Height - Inches26
Height - Inches39
Length - Feet2
Length - Feet32
Length overall - Detail20 ft. 0 in
Length overall - Detail32 ft
Length overall - Meters6.1
Length overall - Meters9.75
Length overall - Inches24
Length overall - Inches384
Deadrisenot available
DeadriseBow: 28° Transom: 18°
Weight - Detailnot available
Weight - Detail4,550 lbs
Weight - kgnot available
Weight - kg2063.84
Weight - lbs.not available
Weight - lbs.455
Width [transom] - Detailnot available
Width [transom] - Detail102 in
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeFlat
Hull typeDeep Vee
Hull thicknessnot available
Hull thicknessBottom: 0.25 in. Sides: 0.16 in. Transom: 0.19 in
Engine and Drivetrain
Fuel typeGas
Fuel typeDiesel
Drive typeNone
Drive typeJet Drive
Engine max40 hp (manual)
Engine max500 hp
Engine makenot available
Engine makeYanmar
Engine modelnot available
Engine model6LY3-UTP
Jet pumpnot available
Jet pumpHamilton 274
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail127 gal
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters480.75
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal127
Horsepowernot available
Horsepower38

Weld-Craft CLT 60 (20 ft.) 2009 vs Weldcraft Marine 300 Ocean King 2013 — Common Questions

Which is the larger boat — the Weld-Craft CLT 60 (20 ft.) 2009 or the Weldcraft Marine 300 Ocean King 2013?
The Weldcraft Marine 300 Ocean King 2013 is the longer of the two at 32,0 feet overall. The Weld-Craft CLT 60 (20 ft.) 2009 comes in at 2,0 feet, making it roughly 30,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weldcraft Marine 300 Ocean King 2013 is rated to a maximum of 500 hp, giving it the larger power ceiling. The Weld-Craft CLT 60 (20 ft.) 2009 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Weld-Craft CLT 60 (20 ft.) 2009 is Coast Guard rated for 6 passengers, while the Weldcraft Marine 300 Ocean King 2013 is certified for 9. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weldcraft Marine 300 Ocean King 2013 measures 102" wide, compared to 84" for the Weld-Craft CLT 60 (20 ft.) 2009. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft CLT 60 (20 ft.) 2009 and Weldcraft Marine 300 Ocean King 2013 from the same manufacturer?
Yes — both the Weld-Craft CLT 60 (20 ft.) 2009 and the Weldcraft Marine 300 Ocean King 2013 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.