Weld-Craft CLT 56 (16 ft.) 2010 boat specs
Weld-Craft
Weld-Craft CLT 56 (16 ft.) 2010
2010
View full specs →
VS
Weld-Craft RS 52 (15 ft.) 2008 boat specs
Weld-Craft
Weld-Craft RS 52 (15 ft.) 2008
2008
View full specs →

Weld-Craft CLT 56 (16 ft.) 2010 vs Weld-Craft RS 52 (15 ft.) 2008 — A Close Look at Two Flats

When two boats share the same hull type — in this case both the Weld-Craft CLT 56 (16 ft.) 2010 and the Weld-Craft RS 52 (15 ft.) 2008 are flat designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

Both boats share a closely matched power ceiling — 35 hp for the Weld-Craft CLT 56 (16 ft.) 2010 and 30 hp for the Weld-Craft RS 52 (15 ft.) 2008. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 4 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Weld-Craft CLT 56 (16 ft.) 2010 and Weld-Craft RS 52 (15 ft.) 2008 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
ModelCLT 56 (16 ft.)
ModelRS 52 (15 ft.)
Model Year201
Model Year2008
Measurements / Dimensions
Beam78 in
Beam74 in
Beam - Meters1.98
Beam - Meters1.88
Beam - Inches78
Beam - Inches74
Height - DetailSide: 22 in
Height - DetailSide: 22 in
Height - Meters0.56
Height - Meters0.56
Height - Inches22
Height - Inches22
Length - Feet16
Length - Feet15
Length overall - Detail16 ft. 0 in
Length overall - Detail15 ft. 0 in
Length overall - Meters4.88
Length overall - Meters4.57
Length overall - Inches192
Length overall - Inches18
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeFlat
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeNone
Drive typeNone
Engine max35 hp (manual)
Engine max30 hp (manual)

Weld-Craft CLT 56 (16 ft.) 2010 vs Weld-Craft RS 52 (15 ft.) 2008 — Common Questions

Which is the larger boat — the Weld-Craft CLT 56 (16 ft.) 2010 or the Weld-Craft RS 52 (15 ft.) 2008?
The Weld-Craft CLT 56 (16 ft.) 2010 is the longer of the two at 16,0 feet overall. The Weld-Craft RS 52 (15 ft.) 2008 comes in at 15,0 feet, making it roughly 1,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
How many people can each boat hold?
The Weld-Craft CLT 56 (16 ft.) 2010 is Coast Guard rated for 4 passengers, while the Weld-Craft RS 52 (15 ft.) 2008 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weld-Craft CLT 56 (16 ft.) 2010 measures 78" wide, compared to 74" for the Weld-Craft RS 52 (15 ft.) 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft CLT 56 (16 ft.) 2010 and Weld-Craft RS 52 (15 ft.) 2008 from the same manufacturer?
Yes — both the Weld-Craft CLT 56 (16 ft.) 2010 and the Weld-Craft RS 52 (15 ft.) 2008 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.