Weld-Craft CLT 52 (17 ft.) 2010 vs Weldcraft Marine 186 2009 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft CLT 52 (17 ft.) 2010 or the Weldcraft Marine 186 2009?

The Weldcraft Marine 186 2009 is the longer of the two at 18,5 feet overall. The Weld-Craft CLT 52 (17 ft.) 2010 comes in at 17,0 feet, making it roughly 1,5 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which boat can handle a bigger outboard?

The Weldcraft Marine 186 2009 is rated to a maximum of 200 hp, giving it the larger power ceiling. The Weld-Craft CLT 52 (17 ft.) 2010 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Weld-Craft CLT 52 (17 ft.) 2010 is Coast Guard rated for 5 passengers, while the Weldcraft Marine 186 2009 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Weldcraft Marine 186 2009 measures 98" wide, compared to 74" for the Weld-Craft CLT 52 (17 ft.) 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Weld-Craft CLT 52 (17 ft.) 2010 and Weldcraft Marine 186 2009 from the same manufacturer?

Yes — both the Weld-Craft CLT 52 (17 ft.) 2010 and the Weldcraft Marine 186 2009 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft CLT 52 (17 ft.) 2010 vs Weldcraft Marine 186 2009

Weld-Craft

Weld-Craft CLT 52 (17 ft.) 2010

2010

View full specs →

Weld-Craft

Weldcraft Marine 186 2009

2009

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft CLT 52 (17 ft.) 2010 vs Weldcraft Marine 186 2009 — Same Brand, Different Boat

Matching a flat Weld-Craft CLT 52 (17 ft.) 2010 against a deep vee Weldcraft Marine 186 2009 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 200 hp, the Weldcraft Marine 186 2009 has a 165-hp advantage over the Weld-Craft CLT 52 (17 ft.) 2010's 35-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Weldcraft Marine 186 2009 and its 200-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weld-Craft CLT 52 (17 ft.) 2010 with its 35-hp rating is the more economical daily driver.

General Boat Info

MakeWeld-Craft

MakeWeldcraft Marine

ModelCLT 52 (17 ft.)

Model186

Model Year201

Model Year2009

Measurements / Dimensions

Beam74 in

Beam98 in

Beam - Meters1.88

Beam - Meters2.49

Beam - Inches74

Beam - Inches98

Height - DetailSide: 22 in

Height - Detail33 x 0.125 in. sides

Height - Meters0.56

Height - Meters0

Height - Inches22

Height - Inches0.125

Length - Feet17

Length - Feet18.5

Length overall - Detail17 ft. 0 in

Length overall - Detail18 ft. 6 in

Length overall - Meters5.18

Length overall - Meters5.64

Length overall - Inches204

Length overall - Inches222

Deadrisenot available

Deadrise33° bow entry 28° forward entry 18° transom

Weight - Detailnot available

Weight - Detail1,740 lbs

Weight - kgnot available

Weight - kg789.25

Weight - lbs.not available

Weight - lbs.174

Width [transom] - Detailnot available

Width [transom] - Detail98 x 0.190 in

Body / Hull

Hull materialAluminum

Hull typeFlat

Hull typeDeep Vee

Engine and Drivetrain

Fuel typeGas

Drive typeNone

Drive typeOutboard

Engine max35 hp (manual)

Engine max200 hp

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail42 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters158.99

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal42

Weld-Craft CLT 52 (17 ft.) 2010 vs Weldcraft Marine 186 2009 — Common Questions

Which is the larger boat — the Weld-Craft CLT 52 (17 ft.) 2010 or the Weldcraft Marine 186 2009?

The Weldcraft Marine 186 2009 is the longer of the two at 18,5 feet overall. The Weld-Craft CLT 52 (17 ft.) 2010 comes in at 17,0 feet, making it roughly 1,5 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which boat can handle a bigger outboard?

The Weldcraft Marine 186 2009 is rated to a maximum of 200 hp, giving it the larger power ceiling. The Weld-Craft CLT 52 (17 ft.) 2010 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Weld-Craft CLT 52 (17 ft.) 2010 is Coast Guard rated for 5 passengers, while the Weldcraft Marine 186 2009 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Weldcraft Marine 186 2009 measures 98" wide, compared to 74" for the Weld-Craft CLT 52 (17 ft.) 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Weld-Craft CLT 52 (17 ft.) 2010 and Weldcraft Marine 186 2009 from the same manufacturer?

Yes — both the Weld-Craft CLT 52 (17 ft.) 2010 and the Weldcraft Marine 186 2009 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft CLT 52 (17 ft.) 2010 full specs ← Weldcraft Marine 186 2009 full specs