Weld-Craft CDL 60 (18 ft.) 2010 boat specs
Weld-Craft
Weld-Craft CDL 60 (18 ft.) 2010
2010
View full specs →
VS
Weldcraft Marine 17 Angler SE 2010 boat specs
Weld-Craft
Weldcraft Marine 17 Angler SE 2010
2010
View full specs →

Weld-Craft CDL 60 (18 ft.) 2010 vs Weldcraft Marine 17 Angler SE 2010 — Same Brand, Different Boat

Matching a flat Weld-Craft CDL 60 (18 ft.) 2010 against a deep vee Weldcraft Marine 17 Angler SE 2010 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 90 hp, the Weldcraft Marine 17 Angler SE 2010 has a 50-hp advantage over the Weld-Craft CDL 60 (18 ft.) 2010's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Weldcraft Marine 17 Angler SE 2010 and its 90-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weld-Craft CDL 60 (18 ft.) 2010 with its 40-hp rating is the more economical daily driver.
General Boat Info
MakeWeld-Craft
MakeWeldcraft Marine
ModelCDL 60 (18 ft.)
Model17 Angler SE
Model Year201
Model Year201
Measurements / Dimensions
Beam84 in
Beam82 in
Beam - Meters2.13
Beam - Meters2.08
Beam - Inches84
Beam - Inches82
Height - DetailSide: 26 in
Height - DetailSides: 28 x 0.100 in
Height - Meters0.66
Height - Meters0
Height - Inches26
Height - Inches0.1
Length - Feet18
Length - Feet17.25
Length overall - Detail18 ft. 0 in
Length overall - Detail17 ft. 3 in
Length overall - Meters5.49
Length overall - Meters5.26
Length overall - Inches216
Length overall - Inches207
Deadrisenot available
Deadrise22° bow entry 17° forward entry 10° transom
Weight - Detailnot available
Weight - Detail975 lbs
Weight - kgnot available
Weight - kg442.25
Weight - lbs.not available
Weight - lbs.975
Width [transom] - Detailnot available
Width [transom] - Detail82 x 0.160 in
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeFlat
Hull typeDeep Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeNone
Drive typeOutboard
Engine max40 hp (manual)
Engine maxProp: 90 hp Jet: 115 / 80 hp
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail21 gal
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters79.49
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal21
Operational Info
Maximum capacitynot available
Maximum capacity1,300 lbs. (motor, persons, gear)
Maximum peoplenot available
Maximum people5 / 665 lbs

Weld-Craft CDL 60 (18 ft.) 2010 vs Weldcraft Marine 17 Angler SE 2010 — Common Questions

Which is the larger boat — the Weld-Craft CDL 60 (18 ft.) 2010 or the Weldcraft Marine 17 Angler SE 2010?
The Weld-Craft CDL 60 (18 ft.) 2010 is the longer of the two at 18,0 feet overall. The Weldcraft Marine 17 Angler SE 2010 comes in at 17,3 feet, making it roughly 0,8 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weldcraft Marine 17 Angler SE 2010 is rated to a maximum of 90 hp, giving it the larger power ceiling. The Weld-Craft CDL 60 (18 ft.) 2010 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Weld-Craft CDL 60 (18 ft.) 2010 is Coast Guard rated for 5 passengers, while the Weldcraft Marine 17 Angler SE 2010 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weld-Craft CDL 60 (18 ft.) 2010 measures 84" wide, compared to 82" for the Weldcraft Marine 17 Angler SE 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft CDL 60 (18 ft.) 2010 and Weldcraft Marine 17 Angler SE 2010 from the same manufacturer?
Yes — both the Weld-Craft CDL 60 (18 ft.) 2010 and the Weldcraft Marine 17 Angler SE 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.