Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 vs Weld-Craft UVCDS 44 (15 ft.) 2008 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 or the Weld-Craft UVCDS 44 (15 ft.) 2008?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 is the longer of the two at 16,0 feet overall. The Weld-Craft UVCDS 44 (15 ft.) 2008 comes in at 15,0 feet, making it roughly 1,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which boat can handle a bigger outboard?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 is rated to a maximum of 65 hp, giving it the larger power ceiling. The Weld-Craft UVCDS 44 (15 ft.) 2008 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 is Coast Guard rated for 17 passengers, while the Weld-Craft UVCDS 44 (15 ft.) 2008 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 measures 83" wide, compared to 66" for the Weld-Craft UVCDS 44 (15 ft.) 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 and Weld-Craft UVCDS 44 (15 ft.) 2008 from the same manufacturer?

Yes — both the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 and the Weld-Craft UVCDS 44 (15 ft.) 2008 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 vs Weld-Craft UVCDS 44 (15 ft.) 2008

Weld-Craft

Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013

2013

View full specs →

Weld-Craft

Weld-Craft UVCDS 44 (15 ft.) 2008

2008

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 vs Weld-Craft UVCDS 44 (15 ft.) 2008 — Same Brand, Different Boat

Matching a modified vee Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 against a flat Weld-Craft UVCDS 44 (15 ft.) 2008 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 65 hp, the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 has a 40-hp advantage over the Weld-Craft UVCDS 44 (15 ft.) 2008's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 is rated for 17 passengers, while the Weld-Craft UVCDS 44 (15 ft.) 2008 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 could be the deciding factor.

Bottom line: Choose the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 if your priority is putting more people on the water — it handles 17 passengers and at 16,0 ft it has the deck room to back that rating up comfortably. The Weld-Craft UVCDS 44 (15 ft.) 2008 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.

General Boat Info

MakeWeld-Craft

Model60 - 70 in. Bottom V/UV Jon Boats

ModelUVCDS 44 (15 ft.)

Model Year2013

Model Year2008

Measurements / Dimensions

Beam83 in

Beam66 in

Beam - Meters2.11

Beam - Meters1.68

Beam - Inches83

Beam - Inches66

Weight - Detail485 lbs

Weight - Detailnot available

Weight - kg219.99

Weight - kgnot available

Weight - lbs.485

Weight - lbs.not available

Width [transom] - Detail60 in. bottom

Width [transom] - Detailnot available

Height - Detail22 in. sides

Height - DetailSide: 22 in

Height - Meters0.56

Height - Inches22

Length - Feet16

Length - Feet15

Length overall - Detail16 ft

Length overall - Detail15 ft. 0 in

Length overall - Meters4.88

Length overall - Meters4.57

Length overall - Inches192

Length overall - Inches18

Body / Hull

Hull materialAluminum

Hull thickness0.1

Hull thicknessnot available

Hull typeModified Vee

Hull typeFlat

Engine and Drivetrain

Engine model17, 22 or 27 in. shaft

Engine modelnot available

Fuel typeGas

Horsepower65 hp manual 80 hp remote with 22 or 27 in. shaft

Horsepowernot available

Drive typenot available

Drive typeNone

Engine maxnot available

Engine max25 hp (manual)

Operational Info

Maximum capacity17 in. Shaft: 1,153 lbs. 22 or 27 in. Shaft: 1,307 lbs

Maximum capacitynot available

Maximum people17 in. Shaft: 5 / 705 lbs. 22 or 27 in. Shaft: 6 / 846 lbs

Maximum peoplenot available

Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 vs Weld-Craft UVCDS 44 (15 ft.) 2008 — Common Questions

Which is the larger boat — the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 or the Weld-Craft UVCDS 44 (15 ft.) 2008?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 is the longer of the two at 16,0 feet overall. The Weld-Craft UVCDS 44 (15 ft.) 2008 comes in at 15,0 feet, making it roughly 1,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which boat can handle a bigger outboard?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 is rated to a maximum of 65 hp, giving it the larger power ceiling. The Weld-Craft UVCDS 44 (15 ft.) 2008 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 is Coast Guard rated for 17 passengers, while the Weld-Craft UVCDS 44 (15 ft.) 2008 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 measures 83" wide, compared to 66" for the Weld-Craft UVCDS 44 (15 ft.) 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 and Weld-Craft UVCDS 44 (15 ft.) 2008 from the same manufacturer?

Yes — both the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 and the Weld-Craft UVCDS 44 (15 ft.) 2008 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 full specs ← Weld-Craft UVCDS 44 (15 ft.) 2008 full specs