Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 vs Weldcraft Marine 186 SD 2010 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 or the Weldcraft Marine 186 SD 2010?

The Weldcraft Marine 186 SD 2010 is the longer of the two at 18,5 feet overall. The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 comes in at 16,0 feet, making it roughly 2,5 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which boat can handle a bigger outboard?

The Weldcraft Marine 186 SD 2010 is rated to a maximum of 200 hp, giving it the larger power ceiling. The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 tops out at 65 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 is Coast Guard rated for 17 passengers, while the Weldcraft Marine 186 SD 2010 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Weldcraft Marine 186 SD 2010 measures 98" wide, compared to 83" for the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 and Weldcraft Marine 186 SD 2010 from the same manufacturer?

Yes — both the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 and the Weldcraft Marine 186 SD 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 vs Weldcraft Marine 186 SD 2010

Weld-Craft

Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013

2013

View full specs →

Weld-Craft

Weldcraft Marine 186 SD 2010

2010

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 vs Weldcraft Marine 186 SD 2010 — Same Brand, Different Boat

Matching a modified vee Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 against a deep vee Weldcraft Marine 186 SD 2010 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 200 hp, the Weldcraft Marine 186 SD 2010 has a 135-hp advantage over the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013's 65-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 is rated for 17 passengers, while the Weldcraft Marine 186 SD 2010 caps at 6. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 could be the deciding factor.

Bottom line: Choose the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 if your priority is putting more people on the water — it handles 17 passengers and at 16,0 ft it has the deck room to back that rating up comfortably. The Weldcraft Marine 186 SD 2010 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 6 that costs less to run day-to-day.

General Boat Info

MakeWeld-Craft

MakeWeldcraft Marine

Model60 - 70 in. Bottom V/UV Jon Boats

Model186 SD

Model Year2013

Model Year201

Measurements / Dimensions

Beam83 in

Beam98 in

Beam - Meters2.11

Beam - Meters2.49

Beam - Inches83

Beam - Inches98

Weight - Detail485 lbs

Weight - DetailN/A

Weight - kg219.99

Weight - kgnot available

Weight - lbs.485

Weight - lbs.not available

Width [transom] - Detail60 in. bottom

Width [transom] - Detail98 x 0.190 in

Height - Detail22 in. sides

Height - DetailSides: 33 x 0.125 in

Height - Meters0.56

Height - Meters0

Height - Inches22

Height - Inches0.125

Length - Feet16

Length - Feet18.5

Length overall - Detail16 ft

Length overall - Detail18 ft. 6 in

Length overall - Meters4.88

Length overall - Meters5.64

Length overall - Inches192

Length overall - Inches222

Deadrisenot available

Deadrise28° bow entry 28° forward entry 18° transom

Body / Hull

Hull materialAluminum

Hull thickness0.1

Hull thicknessnot available

Hull typeModified Vee

Hull typeDeep Vee

Engine and Drivetrain

Engine model17, 22 or 27 in. shaft

Engine modelnot available

Fuel typeGas

Horsepower65 hp manual 80 hp remote with 22 or 27 in. shaft

Horsepowernot available

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail42 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters158.99

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal42

Drive typenot available

Drive typeOther

Engine maxnot available

Engine max200 hp

Operational Info

Maximum capacity17 in. Shaft: 1,153 lbs. 22 or 27 in. Shaft: 1,307 lbs

Maximum capacity1,550 lbs

Maximum people17 in. Shaft: 5 / 705 lbs. 22 or 27 in. Shaft: 6 / 846 lbs

Maximum people6 / 960 lbs

Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 vs Weldcraft Marine 186 SD 2010 — Common Questions

Which is the larger boat — the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 or the Weldcraft Marine 186 SD 2010?

The Weldcraft Marine 186 SD 2010 is the longer of the two at 18,5 feet overall. The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 comes in at 16,0 feet, making it roughly 2,5 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which boat can handle a bigger outboard?

The Weldcraft Marine 186 SD 2010 is rated to a maximum of 200 hp, giving it the larger power ceiling. The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 tops out at 65 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 is Coast Guard rated for 17 passengers, while the Weldcraft Marine 186 SD 2010 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Weldcraft Marine 186 SD 2010 measures 98" wide, compared to 83" for the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 and Weldcraft Marine 186 SD 2010 from the same manufacturer?

Yes — both the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 and the Weldcraft Marine 186 SD 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 full specs ← Weldcraft Marine 186 SD 2010 full specs