Weld-Craft 52 - 56 in. Bottom Flat Jon Boats 2013 boat specs
Weld-Craft
Weld-Craft 52 - 56 in. Bottom Flat Jon Boats 2013
2013
View full specs →
VS
Weld-Craft CDL 52 Pontoon (14 ft.) 2008 boat specs
Weld-Craft
Weld-Craft CDL 52 Pontoon (14 ft.) 2008
2008
View full specs →

Weld-Craft 52 - 56 in. Bottom Flat Jon Boats 2013 vs Weld-Craft CDL 52 Pontoon (14 ft.) 2008: Same Brand, Different Boat

The Weld-Craft 52 - 56 in. Bottom Flat Jon Boats 2013 is a flat-bottom design and the Weld-Craft CDL 52 Pontoon (14 ft.) 2008 is a pontoon design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 50 hp, the Weld-Craft 52 - 56 in. Bottom Flat Jon Boats 2013 has a 25-hp advantage over the Weld-Craft CDL 52 Pontoon (14 ft.) 2008's 25-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Weld-Craft 52 - 56 in. Bottom Flat Jon Boats 2013 and its 50-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weld-Craft CDL 52 Pontoon (14 ft.) 2008 with its 25-hp rating is the more economical daily driver.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model52 - 56 in. Bottom Flat Jon Boats
ModelCDL 52 Pontoon (14 ft.)
Model Year2013
Model Year2008
Measurements / Dimensions
Beam75 in.
Beam74 in.
Beam - Meters1.91
Beam - Meters1.88
Beam - Inches75
Beam - Inches74
Weight - Detail350 lbs.
Weight - Detailnot available
Weight - kg158.76
Weight - kgnot available
Weight - lbs.350
Weight - lbs.not available
Width [transom] - Detail52 in. bottom
Width [transom] - Detailnot available
Height - Detail22 in. sides
Height - DetailSide: 22 in.
Height - Meters0.56
Height - Meters0.56
Height - Inches22
Height - Inches22
Length - Feet14
Length - Feet14
Length overall - Detail14 ft.
Length overall - Detail14 ft. 0 in.
Length overall - Meters4.27
Length overall - Meters4.27
Length overall - Inches168
Length overall - Inches168
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.1
Hull thicknessnot available
Hull typeFlat
Hull typePontoon
Engine and Drivetrain
Engine model17 in. shaft
Engine modelnot available
Fuel typeGas
Fuel typeGas
Horsepower50 hp manual
Horsepowernot available
Drive typenot available
Drive typeNone
Engine maxnot available
Engine max25 hp (manual)
Operational Info
Maximum capacity920 lbs.
Maximum capacitynot available
Maximum people4 / 564 lbs.
Maximum peoplenot available

Weld-Craft 52 - 56 in. Bottom Flat Jon Boats 2013 vs Weld-Craft CDL 52 Pontoon (14 ft.) 2008 - Common Questions

Which is the larger boat - the Weld-Craft 52 - 56 in. Bottom Flat Jon Boats 2013 or the Weld-Craft CDL 52 Pontoon (14 ft.) 2008?
The Weld-Craft CDL 52 Pontoon (14 ft.) 2008 is the longer of the two at 14,0 feet overall. The Weld-Craft 52 - 56 in. Bottom Flat Jon Boats 2013 comes in at 14,0 feet, making it roughly 0,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft 52 - 56 in. Bottom Flat Jon Boats 2013 is rated to a maximum of 50 hp, giving it the larger power ceiling. The Weld-Craft CDL 52 Pontoon (14 ft.) 2008 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Weld-Craft 52 - 56 in. Bottom Flat Jon Boats 2013 is Coast Guard rated for 4 passengers, while the Weld-Craft CDL 52 Pontoon (14 ft.) 2008 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weld-Craft 52 - 56 in. Bottom Flat Jon Boats 2013 measures 75" wide, compared to 74" for the Weld-Craft CDL 52 Pontoon (14 ft.) 2008. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 52 - 56 in. Bottom Flat Jon Boats 2013 and Weld-Craft CDL 52 Pontoon (14 ft.) 2008 from the same manufacturer?
Yes - both the Weld-Craft 52 - 56 in. Bottom Flat Jon Boats 2013 and the Weld-Craft CDL 52 Pontoon (14 ft.) 2008 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.