Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 boat specs
Weld-Craft
Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013
2013
View full specs →
VS
Weld-Craft Stick 2012 boat specs
Weld-Craft
Weld-Craft Stick 2012
2012
View full specs →

Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 vs Weld-Craft Stick 2012: Same Brand, Different Boat

The Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 is a flat-bottom design and the Weld-Craft Stick 2012 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 at 12,0 ft versus Weld-Craft Stick 2012 at 15,0 ft. Weight tells a clearer story for trailering families: the Weld-Craft Stick 2012 tips the scales at 500 lbs - 325 lbs less than the Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 at 175 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 40 hp, the Weld-Craft Stick 2012 has a 25-hp advantage over the Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013's 15-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 3 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 comes in at 12 lbs per hp versus 13 lbs per hp for the Weld-Craft Stick 2012. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The Weld-Craft Stick 2012 at 15,0 ft is the right call if deck space, comfort, and entertaining are top of your list. The Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 at 12,0 ft wins on trailering ease, likely lower purchase price, and simpler docking - a solid choice for a buyer who wants more boat for less money.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model36 - 44 in. Bottom Flat Jon Boats
ModelStick
Model Year2013
Model Year2012
Measurements / Dimensions
Beam59 in.
Beam66 in.
Beam - Meters1.5
Beam - Meters1.68
Beam - Inches59
Beam - Inches66
Weight - Detail175 lbs.
Weight - Detail500 lbs.
Weight - kg79.38
Weight - kg226.8
Weight - lbs.175
Weight - lbs.500
Width [transom] - Detail36 in. bottom
Width [transom] - Detail44 in. bottom
Height - Detail19 in. side
Height - Detail22 in. side
Height - Meters0.48
Height - Meters0.56
Height - Inches19
Height - Inches22
Length - Feet12
Length - Feet15
Length overall - Detail12 ft.
Length overall - Detailnot available
Length overall - Meters3.66
Length overall - Metersnot available
Length overall - Inches144
Length overall - Inchesnot available
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.080 in.
Hull thickness0.100 in.
Hull typeFlat
Hull typeModified Vee
Engine and Drivetrain
Engine model16 in. shaft
Engine model22 in. shaft
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Horsepower15 hp manual
Horsepower40 hp
Operational Info
Maximum capacity552 lbs.
Maximum capacity850 lbs.
Maximum people3 / 423 lbs.
Maximum people3

Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 vs Weld-Craft Stick 2012 - Common Questions

Which is the larger boat - the Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 or the Weld-Craft Stick 2012?
The Weld-Craft Stick 2012 is the longer of the two at 15,0 feet overall. The Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 comes in at 12,0 feet, making it roughly 3,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 or the Weld-Craft Stick 2012?
For trailering, the Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 has the edge at 175 lbs dry weight versus 500 lbs for the Weld-Craft Stick 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Weld-Craft Stick 2012 is rated to a maximum of 40 hp, giving it the larger power ceiling. The Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 tops out at 15 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 is Coast Guard rated for 3 passengers, while the Weld-Craft Stick 2012 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 has a better power-to-weight ratio at 12 lbs per hp compared to 13 lbs per hp for the Weld-Craft Stick 2012. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Weld-Craft Stick 2012 measures 66" wide, compared to 59" for the Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 and Weld-Craft Stick 2012 from the same manufacturer?
Yes - both the Weld-Craft 36 - 44 in. Bottom Flat Jon Boats 2013 and the Weld-Craft Stick 2012 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.