Weld-Craft 2060 Pro Bass 2013 boat specs
Weld-Craft
Weld-Craft 2060 Pro Bass 2013
2013
View full specs →
VS
Weldcraft Marine 21 Sabre 2013 boat specs
Weld-Craft
Weldcraft Marine 21 Sabre 2013
2013
View full specs →

Weld-Craft 2060 Pro Bass 2013 vs Weldcraft Marine 21 Sabre 2013: Same Brand, Different Boat

The Weld-Craft 2060 Pro Bass 2013 is a modified-V design and the Weldcraft Marine 21 Sabre 2013 is a deep-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Weld-Craft 2060 Pro Bass 2013 at 20,3 ft versus Weldcraft Marine 21 Sabre 2013 at 21,0 ft. Weight tells a clearer story for trailering families: the Weldcraft Marine 21 Sabre 2013 tips the scales at 2 800 lbs - 1 550 lbs less than the Weld-Craft 2060 Pro Bass 2013 at 1 250 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Weld-Craft 2060 Pro Bass 2013 carries a rated maximum of 150 hp. Engine data for the Weldcraft Marine 21 Sabre 2013 wasn't available in our records - check the manufacturer's spec sheet before sizing a motor.

Both boats are rated for 6 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Weld-Craft 2060 Pro Bass 2013 and Weldcraft Marine 21 Sabre 2013 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeWeld-Craft
MakeWeldcraft Marine
Model2060 Pro Bass
Model21 Sabre
Model Year2013
Model Year2013
Measurements / Dimensions
Beam82 in.
Beam94 in.
Beam - Meters2.08
Beam - Meters2.39
Beam - Inches82
Beam - Inches94
Weight - Detail1,250 lbs.
Weight - Detail2,800 lbs.
Weight - kg566.99
Weight - kg1270.06
Weight - lbs.1250
Weight - lbs.2800
Width [transom] - Detail60 in. bottom
Width [transom] - Detail94 in.
Height - Detail22 in. side
Height - DetailSides: 33 in.
Height - Meters0.56
Height - Meters0.84
Height - Inches22
Height - Inches33
Length - Feet20.33
Length - Feet21
Length overall - Detail20 ft. 4 in.
Length overall - Detail21 ft.
Length overall - Meters6.2
Length overall - Meters6.4
Length overall - Inches244
Length overall - Inches252
Deadrisenot available
DeadriseTransom: 12°
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in.
Hull thicknessBottom: 0.19 in. Sides: 0.125 in. Transom: 0.19 in.
Hull typeModified Vee
Hull typeDeep Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeJet Drive
Horsepower150 hp
Horsepowernot available
Engine modelnot available
Engine model5.7 l MEFI-5
Jet pumpnot available
Jet pumpAmerican Turbine SD-309
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail62 gal.
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters234.7
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal62
Operational Info
Maximum capacity1,570 lbs.
Maximum capacitynot available
Maximum people6 / 846 lbs.
Maximum peoplenot available

Weld-Craft 2060 Pro Bass 2013 vs Weldcraft Marine 21 Sabre 2013 - Common Questions

Which is the larger boat - the Weld-Craft 2060 Pro Bass 2013 or the Weldcraft Marine 21 Sabre 2013?
The Weldcraft Marine 21 Sabre 2013 is the longer of the two at 21,0 feet overall. The Weld-Craft 2060 Pro Bass 2013 comes in at 20,3 feet, making it roughly 0,7 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Weld-Craft 2060 Pro Bass 2013 or the Weldcraft Marine 21 Sabre 2013?
For trailering, the Weld-Craft 2060 Pro Bass 2013 has the edge at 1 250 lbs dry weight versus 2 800 lbs for the Weldcraft Marine 21 Sabre 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Weld-Craft 2060 Pro Bass 2013 has a documented max rating of 150 hp. Engine specifications for the Weldcraft Marine 21 Sabre 2013 were not available in our database - check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Weld-Craft 2060 Pro Bass 2013 is Coast Guard rated for 6 passengers, while the Weldcraft Marine 21 Sabre 2013 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weldcraft Marine 21 Sabre 2013 measures 94" wide, compared to 82" for the Weld-Craft 2060 Pro Bass 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 2060 Pro Bass 2013 and Weldcraft Marine 21 Sabre 2013 from the same manufacturer?
Yes - both the Weld-Craft 2060 Pro Bass 2013 and the Weldcraft Marine 21 Sabre 2013 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.