Weld-Craft 1960 Pro Bass 2013 boat specs
Weld-Craft
Weld-Craft 1960 Pro Bass 2013
2013
View full specs →
VS
Weldcraft Marine 18 2010 boat specs
Weld-Craft
Weldcraft Marine 18 2010
2010
View full specs →

Weld-Craft 1960 Pro Bass 2013 vs Weldcraft Marine 18 2010: Same Brand, Different Boat

The Weld-Craft 1960 Pro Bass 2013 is a modified-V design and the Weldcraft Marine 18 2010 is a deep-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Weld-Craft 1960 Pro Bass 2013 at 19,2 ft versus Weldcraft Marine 18 2010 at 18,1 ft. Weight tells a clearer story for trailering families: the Weldcraft Marine 18 2010 tips the scales at 2 400 lbs - 1 200 lbs less than the Weld-Craft 1960 Pro Bass 2013 at 1 200 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Weld-Craft 1960 Pro Bass 2013 carries a rated maximum of 150 hp. Engine data for the Weldcraft Marine 18 2010 wasn't available in our records - check the manufacturer's spec sheet before sizing a motor.

Both boats are rated for 6 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Weld-Craft 1960 Pro Bass 2013 and Weldcraft Marine 18 2010 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeWeld-Craft
MakeWeldcraft Marine
Model1960 Pro Bass
Model18
Model Year2013
Model Year2010
Measurements / Dimensions
Beam82 in.
Beam86 in.
Beam - Meters2.08
Beam - Meters2.18
Beam - Inches82
Beam - Inches86
Weight - Detail1,200 lbs.
Weight - Detail2,400 lbs.
Weight - kg544.31
Weight - kg1088.62
Weight - lbs.1200
Weight - lbs.2400
Width [transom] - Detail60 in. bottom
Width [transom] - Detail86 x 0.160 in.
Height - Detail22 in. side
Height - DetailSides: 30 x 0.100 in.
Height - Meters0.56
Height - Metersnot available
Height - Inches22
Height - Inches0.1
Length - Feet19.17
Length - Feet18.08
Length overall - Detail19 ft. 2 in.
Length overall - Detail18 ft. 1 in.
Length overall - Meters5.84
Length overall - Meters5.51
Length overall - Inches230
Length overall - Inches217
Deadrisenot available
Deadrise22.5° bow entry 16° forward entry 14° transom
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in.
Hull thicknessnot available
Hull typeModified Vee
Hull typeDeep Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeJet Drive
Horsepower150 hp
Horsepowernot available
Engine modelnot available
Engine modelMarine Power 5.0 V-8 carb
Jet pumpnot available
Jet pumpAmerican Turbine SD-309
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail42 gal.
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters158.99
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal42
Operational Info
Maximum capacity1,552 lbs.
Maximum capacity1,300 lbs.
Maximum people6 / 846 lbs.
Maximum people6 / 980 lbs.

Weld-Craft 1960 Pro Bass 2013 vs Weldcraft Marine 18 2010 - Common Questions

Which is the larger boat - the Weld-Craft 1960 Pro Bass 2013 or the Weldcraft Marine 18 2010?
The Weld-Craft 1960 Pro Bass 2013 is the longer of the two at 19,2 feet overall. The Weldcraft Marine 18 2010 comes in at 18,1 feet, making it roughly 1,1 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Weld-Craft 1960 Pro Bass 2013 or the Weldcraft Marine 18 2010?
For trailering, the Weld-Craft 1960 Pro Bass 2013 has the edge at 1 200 lbs dry weight versus 2 400 lbs for the Weldcraft Marine 18 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Weld-Craft 1960 Pro Bass 2013 has a documented max rating of 150 hp. Engine specifications for the Weldcraft Marine 18 2010 were not available in our database - check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Weld-Craft 1960 Pro Bass 2013 is Coast Guard rated for 6 passengers, while the Weldcraft Marine 18 2010 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weldcraft Marine 18 2010 measures 86" wide, compared to 82" for the Weld-Craft 1960 Pro Bass 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1960 Pro Bass 2013 and Weldcraft Marine 18 2010 from the same manufacturer?
Yes - both the Weld-Craft 1960 Pro Bass 2013 and the Weldcraft Marine 18 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.