Weld-Craft 1852 V Bass 2008 boat specs
Weld-Craft
Weld-Craft 1852 V Bass 2008
2008
View full specs →
VS
Weld-Craft RS 60 (18 ft.) 2009 boat specs
Weld-Craft
Weld-Craft RS 60 (18 ft.) 2009
2009
View full specs →

Weld-Craft 1852 V Bass 2008 vs Weld-Craft RS 60 (18 ft.) 2009 — A Close Look at Two Flats

When two boats share the same hull type — in this case both the Weld-Craft 1852 V Bass 2008 and the Weld-Craft RS 60 (18 ft.) 2009 are flat designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

The power gap is worth calling out. Rated to 115 hp, the Weld-Craft 1852 V Bass 2008 has a 75-hp advantage over the Weld-Craft RS 60 (18 ft.) 2009's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Weld-Craft 1852 V Bass 2008 and its 115-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weld-Craft RS 60 (18 ft.) 2009 with its 40-hp rating is the more economical daily driver.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1852 V Bass
ModelRS 60 (18 ft.)
Model Year2008
Model Year2009
Measurements / Dimensions
Beam74 in
Beam84 in
Beam - Meters1.88
Beam - Meters2.13
Beam - Inches74
Beam - Inches84
Height - DetailSide: 22 in
Height - DetailSide: 26 in
Height - Meters0.56
Height - Meters0.66
Height - Inches22
Height - Inches26
Length - Feet18
Length - Feet18
Length overall - Detail18 ft. 0 in
Length overall - Detail18 ft. 0 in
Length overall - Meters5.49
Length overall - Meters5.49
Length overall - Inches216
Length overall - Inches216
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeFlat
Hull typeFlat
Engine and Drivetrain
Fuel tank capacity - Detail19 gal
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters71.92
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal19
Fuel tank capacity - Galnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeNone
Engine max115 hp
Engine max40 hp (manual)

Weld-Craft 1852 V Bass 2008 vs Weld-Craft RS 60 (18 ft.) 2009 — Common Questions

Which is the larger boat — the Weld-Craft 1852 V Bass 2008 or the Weld-Craft RS 60 (18 ft.) 2009?
The Weld-Craft RS 60 (18 ft.) 2009 is the longer of the two at 18,0 feet overall. The Weld-Craft 1852 V Bass 2008 comes in at 18,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft 1852 V Bass 2008 is rated to a maximum of 115 hp, giving it the larger power ceiling. The Weld-Craft RS 60 (18 ft.) 2009 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Weld-Craft 1852 V Bass 2008 is Coast Guard rated for 5 passengers, while the Weld-Craft RS 60 (18 ft.) 2009 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weld-Craft RS 60 (18 ft.) 2009 measures 84" wide, compared to 74" for the Weld-Craft 1852 V Bass 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1852 V Bass 2008 and Weld-Craft RS 60 (18 ft.) 2009 from the same manufacturer?
Yes — both the Weld-Craft 1852 V Bass 2008 and the Weld-Craft RS 60 (18 ft.) 2009 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.