Weld-Craft 1852 V Bass 2008 boat specs
Weld-Craft
Weld-Craft 1852 V Bass 2008
2008
View full specs →
VS
Weld-Craft Jon Boats 2011 boat specs
Weld-Craft
Weld-Craft Jon Boats 2011
2011
View full specs →

Weld-Craft 1852 V Bass 2008 vs Weld-Craft Jon Boats 2011 — Which Flat Fits Your Needs?

When two boats share the same hull type — in this case both the Weld-Craft 1852 V Bass 2008 and the Weld-Craft Jon Boats 2011 are flat designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

The power gap is worth calling out. Rated to 115 hp, the Weld-Craft 1852 V Bass 2008 has a 100-hp advantage over the Weld-Craft Jon Boats 2011's 15-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

The Weld-Craft 1852 V Bass 2008 is rated for up to 5 people. Passenger data for the Weld-Craft Jon Boats 2011 wasn't available.

Bottom line: The Weld-Craft 1852 V Bass 2008 at 18,0 ft is the right call if deck space, comfort, and entertaining are top of your list. The Weld-Craft Jon Boats 2011 at 12,0 ft wins on trailering ease, likely lower purchase price, and simpler docking — a solid choice for a buyer who wants more boat for less money.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1852 V Bass
ModelJon Boats
Model Year2008
Model Year2011
Measurements / Dimensions
Beam74 in
Beam59 in
Beam - Meters1.88
Beam - Meters1.5
Beam - Inches74
Beam - Inches59
Height - DetailSide: 22 in
Height - Detail19 in. side
Height - Meters0.56
Height - Meters0.48
Height - Inches22
Height - Inches19
Length - Feet18
Length - Feet12
Length overall - Detail18 ft. 0 in
Length overall - Detailnot available
Length overall - Meters5.49
Length overall - Metersnot available
Length overall - Inches216
Length overall - Inchesnot available
Width [transom] - Detailnot available
Width [transom] - Detail36 in
Height [transom]not available
Height [transom]17 or 22 in
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeFlat
Hull typeFlat
Hull thicknessnot available
Hull thickness0.080 in
Engine and Drivetrain
Fuel tank capacity - Detail19 gal
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters71.92
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal19
Fuel tank capacity - Galnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max115 hp
Engine maxnot available
Horsepowernot available
Horsepower15 hp manual

Weld-Craft 1852 V Bass 2008 vs Weld-Craft Jon Boats 2011 — Common Questions

Which is the larger boat — the Weld-Craft 1852 V Bass 2008 or the Weld-Craft Jon Boats 2011?
The Weld-Craft 1852 V Bass 2008 is the longer of the two at 18,0 feet overall. The Weld-Craft Jon Boats 2011 comes in at 12,0 feet, making it roughly 6,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft 1852 V Bass 2008 is rated to a maximum of 115 hp, giving it the larger power ceiling. The Weld-Craft Jon Boats 2011 tops out at 15 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many passengers can the Weld-Craft 1852 V Bass 2008 carry?
The Weld-Craft 1852 V Bass 2008 has an official capacity rating of 5 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.
Which boat is wider, and does it affect trailering?
The Weld-Craft 1852 V Bass 2008 measures 74" wide, compared to 59" for the Weld-Craft Jon Boats 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1852 V Bass 2008 and Weld-Craft Jon Boats 2011 from the same manufacturer?
Yes — both the Weld-Craft 1852 V Bass 2008 and the Weld-Craft Jon Boats 2011 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.