Weld-Craft 1852 F Bass 2011 boat specs
Weld-Craft
Weld-Craft 1852 F Bass 2011
2011
View full specs →
VS
Weld-Craft CDL 52 Pontoon (16 ft.) 2010 boat specs
Weld-Craft
Weld-Craft CDL 52 Pontoon (16 ft.) 2010
2010
View full specs →

Weld-Craft 1852 F Bass 2011 vs Weld-Craft CDL 52 Pontoon (16 ft.) 2010 — Same Brand, Different Boat

Matching a flat Weld-Craft 1852 F Bass 2011 against a pontoon Weld-Craft CDL 52 Pontoon (16 ft.) 2010 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 115 hp, the Weld-Craft 1852 F Bass 2011 has a 80-hp advantage over the Weld-Craft CDL 52 Pontoon (16 ft.) 2010's 35-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Bottom line: Performance buyers should lean toward the Weld-Craft 1852 F Bass 2011 and its 115-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weld-Craft CDL 52 Pontoon (16 ft.) 2010 with its 35-hp rating is the more economical daily driver.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1852 F Bass
ModelCDL 52 Pontoon (16 ft.)
Model Year2011
Model Year201
Measurements / Dimensions
Beam74 in
Beam74 in
Beam - Meters1.88
Beam - Meters1.88
Beam - Inches74
Beam - Inches74
Width [transom] - Detail52 in
Width [transom] - Detailnot available
Height - Detail22 in. side
Height - DetailSide: 22 in
Height - Meters0.56
Height - Meters0.56
Height - Inches22
Height - Inches22
Length - Feet18
Length - Feet16
Length overall - Detailnot available
Length overall - Detail16 ft. 0 in
Length overall - Metersnot available
Length overall - Meters4.88
Length overall - Inchesnot available
Length overall - Inches192
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeFlat
Hull typePontoon
Engine and Drivetrain
Fuel tank capacity - Detail19 gal
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters71.92
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal19
Fuel tank capacity - Galnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeNone
Horsepower115 hp
Horsepowernot available
Engine maxnot available
Engine max35 hp (manual)

Weld-Craft 1852 F Bass 2011 vs Weld-Craft CDL 52 Pontoon (16 ft.) 2010 — Common Questions

Which is the larger boat — the Weld-Craft 1852 F Bass 2011 or the Weld-Craft CDL 52 Pontoon (16 ft.) 2010?
The Weld-Craft 1852 F Bass 2011 is the longer of the two at 18,0 feet overall. The Weld-Craft CDL 52 Pontoon (16 ft.) 2010 comes in at 16,0 feet, making it roughly 2,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft 1852 F Bass 2011 is rated to a maximum of 115 hp, giving it the larger power ceiling. The Weld-Craft CDL 52 Pontoon (16 ft.) 2010 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many passengers can the Weld-Craft CDL 52 Pontoon (16 ft.) 2010 carry?
The Weld-Craft CDL 52 Pontoon (16 ft.) 2010 has an official capacity rating of 4 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Weld-Craft 1852 F Bass 2011 and Weld-Craft CDL 52 Pontoon (16 ft.) 2010 share an 74 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the Weld-Craft 1852 F Bass 2011 and Weld-Craft CDL 52 Pontoon (16 ft.) 2010 from the same manufacturer?
Yes — both the Weld-Craft 1852 F Bass 2011 and the Weld-Craft CDL 52 Pontoon (16 ft.) 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.