Weld-Craft 1756 9V Bass 2010 boat specs
Weld-Craft
Weld-Craft 1756 9V Bass 2010
2010
View full specs →
VS
Weld-Craft 48 in. Bottom Flat Jon Boats 2013 boat specs
Weld-Craft
Weld-Craft 48 in. Bottom Flat Jon Boats 2013
2013
View full specs →

Weld-Craft 1756 9V Bass 2010 vs Weld-Craft 48 in. Bottom Flat Jon Boats 2013 — Which Flat Fits Your Needs?

When two boats share the same hull type — in this case both the Weld-Craft 1756 9V Bass 2010 and the Weld-Craft 48 in. Bottom Flat Jon Boats 2013 are flat designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

The Weld-Craft 48 in. Bottom Flat Jon Boats 2013 tops out at 30 hp. Engine specs for the Weld-Craft 1756 9V Bass 2010 aren't listed — confirm with a dealer before selecting an outboard.

For family outings this is probably the sharpest distinction between the two. The Weld-Craft 1756 9V Bass 2010 is rated for 5 passengers, while the Weld-Craft 48 in. Bottom Flat Jon Boats 2013 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Weld-Craft 1756 9V Bass 2010 could be the deciding factor.

Bottom line: Choose the Weld-Craft 1756 9V Bass 2010 if your priority is putting more people on the water — it handles 5 passengers and at 17,0 ft it has the deck room to back that rating up comfortably. The Weld-Craft 48 in. Bottom Flat Jon Boats 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1756 9V Bass
Model48 in. Bottom Flat Jon Boats
Model Year201
Model Year2013
Measurements / Dimensions
Length - Feet17
Length - Feet12
Length overall - Detail17 ft
Length overall - Detail12 ft
Length overall - Meters5.18
Length overall - Meters3.66
Length overall - Inches204
Length overall - Inches144
Beamnot available
Beam71 in
Beam - Metersnot available
Beam - Meters1.8
Beam - Inchesnot available
Beam - Inches71
Weight - Detailnot available
Weight - Detail320 lbs
Weight - kgnot available
Weight - kg145.15
Weight - lbs.not available
Weight - lbs.32
Width [transom] - Detailnot available
Width [transom] - Detail48 in. bottom
Height - Detailnot available
Height - Detail22 in. sides
Height - Metersnot available
Height - Meters0.56
Height - Inchesnot available
Height - Inches22
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeFlat
Hull typeFlat
Hull thicknessnot available
Hull thickness0.1
Engine and Drivetrain
Fuel tank capacity - Detail19 gal
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters71.92
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal19
Fuel tank capacity - Galnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine modelnot available
Engine model17 in. shaft
Horsepowernot available
Horsepower30 hp manual
Operational Info
Maximum capacitynot available
Maximum capacity706 lbs
Maximum peoplenot available
Maximum people3 / 423 lbs

Weld-Craft 1756 9V Bass 2010 vs Weld-Craft 48 in. Bottom Flat Jon Boats 2013 — Common Questions

Which is the larger boat — the Weld-Craft 1756 9V Bass 2010 or the Weld-Craft 48 in. Bottom Flat Jon Boats 2013?
The Weld-Craft 1756 9V Bass 2010 is the longer of the two at 17,0 feet overall. The Weld-Craft 48 in. Bottom Flat Jon Boats 2013 comes in at 12,0 feet, making it roughly 5,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
What is the maximum horsepower rating for these boats?
The Weld-Craft 48 in. Bottom Flat Jon Boats 2013 has a documented max rating of 30 hp. Engine specifications for the Weld-Craft 1756 9V Bass 2010 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Weld-Craft 1756 9V Bass 2010 is Coast Guard rated for 5 passengers, while the Weld-Craft 48 in. Bottom Flat Jon Boats 2013 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Are the Weld-Craft 1756 9V Bass 2010 and Weld-Craft 48 in. Bottom Flat Jon Boats 2013 from the same manufacturer?
Yes — both the Weld-Craft 1756 9V Bass 2010 and the Weld-Craft 48 in. Bottom Flat Jon Boats 2013 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.