Weld-Craft 1752 CDL 2012 vs Weldcraft Marine 220 Ocean King 2013 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft 1752 CDL 2012 or the Weldcraft Marine 220 Ocean King 2013?

The Weldcraft Marine 220 Ocean King 2013 is the longer of the two at 24,0 feet overall. The Weld-Craft 1752 CDL 2012 comes in at 17,0 feet, making it roughly 7,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which boat can handle a bigger outboard?

The Weldcraft Marine 220 Ocean King 2013 is rated to a maximum of 300 hp, giving it the larger power ceiling. The Weld-Craft 1752 CDL 2012 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many passengers can the Weldcraft Marine 220 Ocean King 2013 carry?

The Weldcraft Marine 220 Ocean King 2013 has an official capacity rating of 7 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.

Q: Which boat is wider, and does it affect trailering?

The Weldcraft Marine 220 Ocean King 2013 measures 102" wide, compared to 8" for the Weld-Craft 1752 CDL 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Weld-Craft 1752 CDL 2012 and Weldcraft Marine 220 Ocean King 2013 from the same manufacturer?

Yes — both the Weld-Craft 1752 CDL 2012 and the Weldcraft Marine 220 Ocean King 2013 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft 1752 CDL 2012 vs Weldcraft Marine 220 Ocean King 2013

Weld-Craft

Weld-Craft 1752 CDL 2012

2012

View full specs →

Weld-Craft

Weldcraft Marine 220 Ocean King 2013

2013

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft 1752 CDL 2012 vs Weldcraft Marine 220 Ocean King 2013 — Same Brand, Different Boat

Matching a modified vee Weld-Craft 1752 CDL 2012 against a deep vee Weldcraft Marine 220 Ocean King 2013 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 300 hp, the Weldcraft Marine 220 Ocean King 2013 has a 265-hp advantage over the Weld-Craft 1752 CDL 2012's 35-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Bottom line: The Weldcraft Marine 220 Ocean King 2013 at 24,0 ft is the right call if deck space, comfort, and entertaining are top of your list. The Weld-Craft 1752 CDL 2012 at 17,0 ft wins on trailering ease, likely lower purchase price, and simpler docking — a solid choice for a buyer who wants more boat for less money.

General Boat Info

MakeWeld-Craft

MakeWeldcraft Marine

Model1752 CDL

Model220 Ocean King

Model Year2012

Model Year2013

Measurements / Dimensions

Beam80 in

Beam102 in

Beam - Meters2.03

Beam - Meters2.59

Beam - Inches8

Beam - Inches102

Width [transom] - Detail53 in. bottom

Width [transom] - Detail102 in

Height - Detail22 in. side

Height - DetailSides: 39 in

Height - Meters0.56

Height - Meters0.99

Height - Inches22

Height - Inches39

Length - Feet17

Length - Feet24

Deadrisenot available

DeadriseBow: 28° Transom: 18°

Weight - Detailnot available

Weight - Detail3,125 lbs

Weight - kgnot available

Weight - kg1417.48

Weight - lbs.not available

Weight - lbs.3125

Length overall - Detailnot available

Length overall - Detail24 ft

Length overall - Metersnot available

Length overall - Meters7.32

Length overall - Inchesnot available

Length overall - Inches288

Body / Hull

Hull materialAluminum

Hull thickness0.100 in

Hull thicknessBottom: 0.19 in. Sides: 0.125 in. Transom: 0.19 in

Hull typeModified Vee

Hull typeDeep Vee

Engine and Drivetrain

Engine model17 or 21 in. shaft

Engine modelnot available

Fuel typeGas

Drive typeOutboard

Horsepower35 hp manual

Horsepowernot available

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail90 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters340.69

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal9

Engine maxnot available

Engine max300 hp

Weld-Craft 1752 CDL 2012 vs Weldcraft Marine 220 Ocean King 2013 — Common Questions

Which is the larger boat — the Weld-Craft 1752 CDL 2012 or the Weldcraft Marine 220 Ocean King 2013?

The Weldcraft Marine 220 Ocean King 2013 is the longer of the two at 24,0 feet overall. The Weld-Craft 1752 CDL 2012 comes in at 17,0 feet, making it roughly 7,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which boat can handle a bigger outboard?

The Weldcraft Marine 220 Ocean King 2013 is rated to a maximum of 300 hp, giving it the larger power ceiling. The Weld-Craft 1752 CDL 2012 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many passengers can the Weldcraft Marine 220 Ocean King 2013 carry?

The Weldcraft Marine 220 Ocean King 2013 has an official capacity rating of 7 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.

Which boat is wider, and does it affect trailering?

The Weldcraft Marine 220 Ocean King 2013 measures 102" wide, compared to 8" for the Weld-Craft 1752 CDL 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Weld-Craft 1752 CDL 2012 and Weldcraft Marine 220 Ocean King 2013 from the same manufacturer?

Yes — both the Weld-Craft 1752 CDL 2012 and the Weldcraft Marine 220 Ocean King 2013 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft 1752 CDL 2012 full specs ← Weldcraft Marine 220 Ocean King 2013 full specs