The Weldcraft Marine 17 Angler SE 2011 vs Weldcraft Marine Angler SE 2006 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
On paper these two are close siblings in the size department — Weldcraft Marine 17 Angler SE 2011 at 17,3 ft versus Weldcraft Marine Angler SE 2006 at 17,0 ft. At 975 lbs and 975 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.
The power gap is worth calling out. Rated to 115 hp, the Weldcraft Marine Angler SE 2006 has a 25-hp advantage over the Weldcraft Marine 17 Angler SE 2011's 90-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Both carry nearly identical fuel loads — 21 gal and 21 gal — so range won't be a tiebreaker here.
Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Weldcraft Marine Angler SE 2006 comes in at 9 lbs per hp versus 11 lbs per hp for the Weldcraft Marine 17 Angler SE 2011. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the Weldcraft Marine Angler SE 2006 and its 115-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weldcraft Marine 17 Angler SE 2011 with its 90-hp rating is the more economical daily driver.