Weldcraft Marine 17 Angler SE 2010 boat specs
Weld-Craft
Weldcraft Marine 17 Angler SE 2010
2010
View full specs →
VS
Weldcraft Marine 220 Maverick  2007 boat specs
Weld-Craft
Weldcraft Marine 220 Maverick 2007
2007
View full specs →

Weldcraft Marine 17 Angler SE 2010 vs Weldcraft Marine 220 Maverick 2007: Same Brand, Different Boat

The Weldcraft Marine 17 Angler SE 2010 vs Weldcraft Marine 220 Maverick 2007 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department - Weldcraft Marine 17 Angler SE 2010 at 17,3 ft versus Weldcraft Marine 220 Maverick 2007 at 18,0 ft. Weight tells a clearer story for trailering families: the Weldcraft Marine 220 Maverick 2007 tips the scales at 2 100 lbs - 1 125 lbs less than the Weldcraft Marine 17 Angler SE 2010 at 975 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Weldcraft Marine 17 Angler SE 2010 carries a rated maximum of 90 hp. Engine data for the Weldcraft Marine 220 Maverick 2007 wasn't available in our records - check the manufacturer's spec sheet before sizing a motor.Fuel capacity breaks the other way: the Weldcraft Marine 220 Maverick 2007 carries 62 gallons versus 21 gallons in the Weldcraft Marine 17 Angler SE 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Weldcraft Marine 17 Angler SE 2010 and Weldcraft Marine 220 Maverick 2007 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeWeldcraft Marine
MakeWeldcraft Marine
Model17 Angler SE
Model220 Maverick
Model Year2010
Model Year2007
Measurements / Dimensions
Beam82 in.
Beam102 in.
Beam - Meters2.08
Beam - Meters2.59
Beam - Inches82
Beam - Inches102
Deadrise22° bow entry 17° forward entry 10° transom
Deadrise28℃ bow to 18℃ variable at transom
Weight - Detail975 lbs.
Weight - Detail2,100 lbs.
Weight - kg442.25
Weight - kg952.54
Weight - lbs.975
Weight - lbs.2100
Width [transom] - Detail82 x 0.160 in.
Width [transom] - Detailnot available
Height - DetailSides: 28 x 0.100 in.
Height - Detailnot available
Height - Inches0.1
Height - Inchesnot available
Length - Feet17.25
Length - Feet18
Length overall - Detail17 ft. 3 in.
Length overall - Detail18 ft. 6 in.
Length overall - Meters5.26
Length overall - Meters5.64
Length overall - Inches207
Length overall - Inches222
Length - Inchesnot available
Length - Inches6
Body / Hull
Hull materialAluminum
Hull materialnot available
Hull typeDeep Vee
Hull typenot available
Engine and Drivetrain
Fuel tank capacity - Detail21 gal.
Fuel tank capacity - Detail62 gal.
Fuel tank capacity - Liters79.49
Fuel tank capacity - Liters234.7
Fuel tank capacity - Gal21
Fuel tank capacity - Gal62
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine maxProp: 90 hp Jet: 115 / 80 hp
Engine maxnot available
Operational Info
Maximum capacity1,300 lbs. (motor, persons, gear)
Maximum capacitynot available
Maximum people5 / 665 lbs.
Maximum peoplenot available

Weldcraft Marine 17 Angler SE 2010 vs Weldcraft Marine 220 Maverick 2007 - Common Questions

Which is the larger boat - the Weldcraft Marine 17 Angler SE 2010 or the Weldcraft Marine 220 Maverick 2007?
The Weldcraft Marine 220 Maverick 2007 is the longer of the two at 18,0 feet overall. The Weldcraft Marine 17 Angler SE 2010 comes in at 17,3 feet, making it roughly 0,8 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Weldcraft Marine 17 Angler SE 2010 or the Weldcraft Marine 220 Maverick 2007?
For trailering, the Weldcraft Marine 17 Angler SE 2010 has the edge at 975 lbs dry weight versus 2 100 lbs for the Weldcraft Marine 220 Maverick 2007. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Weldcraft Marine 17 Angler SE 2010 has a documented max rating of 90 hp. Engine specifications for the Weldcraft Marine 220 Maverick 2007 were not available in our database - check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Weldcraft Marine 17 Angler SE 2010 is Coast Guard rated for 5 passengers, while the Weldcraft Marine 220 Maverick 2007 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weldcraft Marine 220 Maverick 2007 measures 102" wide, compared to 82" for the Weldcraft Marine 17 Angler SE 2010. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Which boat has the larger fuel tank - the Weldcraft Marine 17 Angler SE 2010 or the Weldcraft Marine 220 Maverick 2007?
The Weldcraft Marine 220 Maverick 2007 has the bigger tank at 62 gallons, versus 21 gallons on the Weldcraft Marine 17 Angler SE 2010. That 41-gallon difference translates to roughly 123–205 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.
Are the Weldcraft Marine 17 Angler SE 2010 and Weldcraft Marine 220 Maverick 2007 from the same manufacturer?
Yes - both the Weldcraft Marine 17 Angler SE 2010 and the Weldcraft Marine 220 Maverick 2007 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.