Weld-Craft 1652 UV Econo Bass 2009 boat specs
Weld-Craft
Weld-Craft 1652 UV Econo Bass 2009
2009
View full specs →
VS
Weld-Craft CDS 52 (14 ft.) 2007 boat specs
Weld-Craft
Weld-Craft CDS 52 (14 ft.) 2007
2007
View full specs →

Weld-Craft 1652 UV Econo Bass 2009 vs Weld-Craft CDS 52 (14 ft.) 2007 — A Close Look at Two Flats

When two boats share the same hull type — in this case both the Weld-Craft 1652 UV Econo Bass 2009 and the Weld-Craft CDS 52 (14 ft.) 2007 are flat designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

The power gap is worth calling out. Rated to 75 hp, the Weld-Craft 1652 UV Econo Bass 2009 has a 50-hp advantage over the Weld-Craft CDS 52 (14 ft.) 2007's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 4 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Weld-Craft 1652 UV Econo Bass 2009 and its 75-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weld-Craft CDS 52 (14 ft.) 2007 with its 25-hp rating is the more economical daily driver.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1652 UV Econo Bass
ModelCDS 52 (14 ft.)
Model Year2009
Model Year2007
Measurements / Dimensions
Beam74 in
Beam74 in
Beam - Meters1.88
Beam - Meters1.88
Beam - Inches74
Beam - Inches74
Height - DetailSide: 22 in
Height - DetailSide: 22 in
Height - Meters0.56
Height - Meters0.56
Height - Inches22
Height - Inches22
Length - Feet16
Length - Feet14
Length overall - Detail16 ft
Length overall - Detail14 ft. 0 in
Length overall - Meters4.88
Length overall - Meters4.27
Length overall - Inches192
Length overall - Inches168
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeFlat
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeNone
Engine max75 hp (remote)
Engine max25 hp (manual)

Weld-Craft 1652 UV Econo Bass 2009 vs Weld-Craft CDS 52 (14 ft.) 2007 — Common Questions

Which is the larger boat — the Weld-Craft 1652 UV Econo Bass 2009 or the Weld-Craft CDS 52 (14 ft.) 2007?
The Weld-Craft 1652 UV Econo Bass 2009 is the longer of the two at 16,0 feet overall. The Weld-Craft CDS 52 (14 ft.) 2007 comes in at 14,0 feet, making it roughly 2,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft 1652 UV Econo Bass 2009 is rated to a maximum of 75 hp, giving it the larger power ceiling. The Weld-Craft CDS 52 (14 ft.) 2007 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Weld-Craft 1652 UV Econo Bass 2009 is Coast Guard rated for 4 passengers, while the Weld-Craft CDS 52 (14 ft.) 2007 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Weld-Craft 1652 UV Econo Bass 2009 and Weld-Craft CDS 52 (14 ft.) 2007 share an 74 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the Weld-Craft 1652 UV Econo Bass 2009 and Weld-Craft CDS 52 (14 ft.) 2007 from the same manufacturer?
Yes — both the Weld-Craft 1652 UV Econo Bass 2009 and the Weld-Craft CDS 52 (14 ft.) 2007 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.