Weld-Craft 1652 UV Econo Bass 2007 boat specs
Weld-Craft
Weld-Craft 1652 UV Econo Bass 2007
2007
View full specs →
VS
Weld-Craft Duck 2013 boat specs
Weld-Craft
Weld-Craft Duck 2013
2013
View full specs →

Weld-Craft 1652 UV Econo Bass 2007 vs Weld-Craft Duck 2013: Same Brand, Different Boat

The Weld-Craft 1652 UV Econo Bass 2007 is a flat-bottom design and the Weld-Craft Duck 2013 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 75 hp, the Weld-Craft 1652 UV Econo Bass 2007 has a 50-hp advantage over the Weld-Craft Duck 2013's 25-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Weld-Craft 1652 UV Econo Bass 2007 and its 75-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weld-Craft Duck 2013 with its 25-hp rating is the more economical daily driver.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1652 UV Econo Bass
ModelDuck
Model Year2007
Model Year2013
Measurements / Dimensions
Beam74 in.
Beam65 in.
Beam - Meters1.88
Beam - Meters1.65
Beam - Inches74
Beam - Inches65
Height - DetailSide: 22 in.
Height - Detail19 in. side
Height - Meters0.56
Height - Meters0.48
Height - Inches22
Height - Inches19
Length - Feet16
Length - Feet15
Length overall - Detail16 ft.
Length overall - Detail15 ft.
Length overall - Meters4.88
Length overall - Meters4.57
Length overall - Inches192
Length overall - Inches180
Weight - Detailnot available
Weight - Detail260 lbs.
Weight - kgnot available
Weight - kg117.93
Weight - lbs.not available
Weight - lbs.260
Width [transom] - Detailnot available
Width [transom] - Detail42 in. bottom
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeFlat
Hull typeModified Vee
Hull thicknessnot available
Hull thickness0.080 in.
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max75 hp (remote)
Engine maxnot available
Engine modelnot available
Engine model17 in. shaft
Horsepowernot available
Horsepower25 hp manual
Operational Info
Maximum capacitynot available
Maximum capacity702 lbs.
Maximum peoplenot available
Maximum people4 / 564 lbs.

Weld-Craft 1652 UV Econo Bass 2007 vs Weld-Craft Duck 2013 - Common Questions

Which is the larger boat - the Weld-Craft 1652 UV Econo Bass 2007 or the Weld-Craft Duck 2013?
The Weld-Craft 1652 UV Econo Bass 2007 is the longer of the two at 16,0 feet overall. The Weld-Craft Duck 2013 comes in at 15,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft 1652 UV Econo Bass 2007 is rated to a maximum of 75 hp, giving it the larger power ceiling. The Weld-Craft Duck 2013 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Weld-Craft 1652 UV Econo Bass 2007 is Coast Guard rated for 4 passengers, while the Weld-Craft Duck 2013 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weld-Craft 1652 UV Econo Bass 2007 measures 74" wide, compared to 65" for the Weld-Craft Duck 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1652 UV Econo Bass 2007 and Weld-Craft Duck 2013 from the same manufacturer?
Yes - both the Weld-Craft 1652 UV Econo Bass 2007 and the Weld-Craft Duck 2013 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.