Weld-Craft 1652 Sportsman 2013 boat specs
Weld-Craft
Weld-Craft 1652 Sportsman 2013
2013
View full specs →
VS
Weldcraft Marine 188 2010 boat specs
Weld-Craft
Weldcraft Marine 188 2010
2010
View full specs →

Weld-Craft 1652 Sportsman 2013 vs Weldcraft Marine 188 2010: Same Brand, Different Boat

The Weld-Craft 1652 Sportsman 2013 is a modified-V design and the Weldcraft Marine 188 2010 is a deep-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Weld-Craft 1652 Sportsman 2013 at 16,0 ft versus Weldcraft Marine 188 2010 at 18,7 ft. Weight tells a clearer story for trailering families: the Weldcraft Marine 188 2010 tips the scales at 1 360 lbs - 840 lbs less than the Weld-Craft 1652 Sportsman 2013 at 520 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 150 hp, the Weldcraft Marine 188 2010 has a 90-hp advantage over the Weld-Craft 1652 Sportsman 2013's 60-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Weldcraft Marine 188 2010 at 18,7 ft is the right call if deck space, comfort, and entertaining are top of your list. The Weld-Craft 1652 Sportsman 2013 at 16,0 ft wins on trailering ease, likely lower purchase price, and simpler docking - a solid choice for a buyer who wants more boat for less money.
General Boat Info
MakeWeld-Craft
MakeWeldcraft Marine
Model1652 Sportsman
Model188
Model Year2013
Model Year2010
Measurements / Dimensions
Beam74 in.
Beam92 in.
Beam - Meters1.88
Beam - Meters2.34
Beam - Inches74
Beam - Inches92
Weight - Detail520 lbs.
Weight - Detail1,360 lbs.
Weight - kg235.87
Weight - kg616.89
Weight - lbs.520
Weight - lbs.1360
Width [transom] - Detail52 in. bottom
Width [transom] - Detail92 x 0.190 in.
Height - Detail22 in. side
Height - DetailSides: 34 x 0.100 in.
Height - Meters0.56
Height - Metersnot available
Height - Inches22
Height - Inches0.1
Length - Feet16
Length - Feet18.67
Length overall - Detail16 ft.
Length overall - Detail18 ft. 8 in.
Length overall - Meters4.88
Length overall - Meters5.69
Length overall - Inches192
Length overall - Inches224
Deadrisenot available
Deadrise28.5° bow entry 24° forward entry 14° transom
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in.
Hull thicknessnot available
Hull typeModified Vee
Hull typeDeep Vee
Engine and Drivetrain
Engine model22 in. shaft
Engine modelnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Horsepower60 hp remote
Horsepowernot available
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail42 gal.
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters158.99
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal42
Engine maxnot available
Engine max150 hp
Operational Info
Maximum capacity1,184 lbs.
Maximum capacitynot available
Maximum people5 / 705 lbs.
Maximum peoplenot available

Weld-Craft 1652 Sportsman 2013 vs Weldcraft Marine 188 2010 - Common Questions

Which is the larger boat - the Weld-Craft 1652 Sportsman 2013 or the Weldcraft Marine 188 2010?
The Weldcraft Marine 188 2010 is the longer of the two at 18,7 feet overall. The Weld-Craft 1652 Sportsman 2013 comes in at 16,0 feet, making it roughly 2,7 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Weld-Craft 1652 Sportsman 2013 or the Weldcraft Marine 188 2010?
For trailering, the Weld-Craft 1652 Sportsman 2013 has the edge at 520 lbs dry weight versus 1 360 lbs for the Weldcraft Marine 188 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Weldcraft Marine 188 2010 is rated to a maximum of 150 hp, giving it the larger power ceiling. The Weld-Craft 1652 Sportsman 2013 tops out at 60 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Weld-Craft 1652 Sportsman 2013 is Coast Guard rated for 5 passengers, while the Weldcraft Marine 188 2010 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weldcraft Marine 188 2010 measures 92" wide, compared to 74" for the Weld-Craft 1652 Sportsman 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1652 Sportsman 2013 and Weldcraft Marine 188 2010 from the same manufacturer?
Yes - both the Weld-Craft 1652 Sportsman 2013 and the Weldcraft Marine 188 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.