Weld-Craft 1652 MUVCS 2012 boat specs
Weld-Craft
Weld-Craft 1652 MUVCS 2012
2012
View full specs →
VS
Weld-Craft Duck 2013 boat specs
Weld-Craft
Weld-Craft Duck 2013
2013
View full specs →

Weld-Craft 1652 MUVCS 2012 vs Weld-Craft Duck 2013 — A Close Look at Two Modified Vees

When two boats share the same hull type — in this case both the Weld-Craft 1652 MUVCS 2012 and the Weld-Craft Duck 2013 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

Both boats share a closely matched power ceiling — 35 hp for the Weld-Craft 1652 MUVCS 2012 and 25 hp for the Weld-Craft Duck 2013. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Bottom line: The Weld-Craft 1652 MUVCS 2012 and Weld-Craft Duck 2013 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1652 MUVCS
ModelDuck
Model Year2012
Model Year2013
Measurements / Dimensions
Beam80 in
Beam65 in
Beam - Meters2.03
Beam - Meters1.65
Beam - Inches8
Beam - Inches65
Width [transom] - Detail53 in. bottom
Width [transom] - Detail42 in. bottom
Height - Detail22 in. side
Height - Detail19 in. side
Height - Meters0.56
Height - Meters0.48
Height - Inches22
Height - Inches19
Length - Feet16
Length - Feet15
Weight - Detailnot available
Weight - Detail260 lbs
Weight - kgnot available
Weight - kg117.93
Weight - lbs.not available
Weight - lbs.26
Length overall - Detailnot available
Length overall - Detail15 ft
Length overall - Metersnot available
Length overall - Meters4.57
Length overall - Inchesnot available
Length overall - Inches18
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in
Hull thickness0.080 in
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Engine model17 or 21 in. shaft
Engine model17 in. shaft
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Horsepower35 hp manual
Horsepower25 hp manual
Operational Info
Maximum capacitynot available
Maximum capacity702 lbs
Maximum peoplenot available
Maximum people4 / 564 lbs

Weld-Craft 1652 MUVCS 2012 vs Weld-Craft Duck 2013 — Common Questions

Which is the larger boat — the Weld-Craft 1652 MUVCS 2012 or the Weld-Craft Duck 2013?
The Weld-Craft 1652 MUVCS 2012 is the longer of the two at 16,0 feet overall. The Weld-Craft Duck 2013 comes in at 15,0 feet, making it roughly 1,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft 1652 MUVCS 2012 is rated to a maximum of 35 hp, giving it the larger power ceiling. The Weld-Craft Duck 2013 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many passengers can the Weld-Craft Duck 2013 carry?
The Weld-Craft Duck 2013 has an official capacity rating of 4 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.
Which boat is wider, and does it affect trailering?
The Weld-Craft Duck 2013 measures 65" wide, compared to 8" for the Weld-Craft 1652 MUVCS 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1652 MUVCS 2012 and Weld-Craft Duck 2013 from the same manufacturer?
Yes — both the Weld-Craft 1652 MUVCS 2012 and the Weld-Craft Duck 2013 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.