Weld-Craft 1652 DD Econo 2013 vs Weld-Craft CDS 52 (17 ft.) 2007 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft 1652 DD Econo 2013 or the Weld-Craft CDS 52 (17 ft.) 2007?

The Weld-Craft CDS 52 (17 ft.) 2007 is the longer of the two at 17,0 feet overall. The Weld-Craft 1652 DD Econo 2013 comes in at 16,0 feet, making it roughly 1,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which boat can handle a bigger outboard?

The Weld-Craft 1652 DD Econo 2013 is rated to a maximum of 80 hp, giving it the larger power ceiling. The Weld-Craft CDS 52 (17 ft.) 2007 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Weld-Craft 1652 DD Econo 2013 is Coast Guard rated for 5 passengers, while the Weld-Craft CDS 52 (17 ft.) 2007 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Do these boats require an oversize trailer permit to tow on US highways?

Both the Weld-Craft 1652 DD Econo 2013 and Weld-Craft CDS 52 (17 ft.) 2007 share an 74 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.

Q: Are the Weld-Craft 1652 DD Econo 2013 and Weld-Craft CDS 52 (17 ft.) 2007 from the same manufacturer?

Yes — both the Weld-Craft 1652 DD Econo 2013 and the Weld-Craft CDS 52 (17 ft.) 2007 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft 1652 DD Econo 2013 vs Weld-Craft CDS 52 (17 ft.) 2007

Weld-Craft

Weld-Craft 1652 DD Econo 2013

2013

View full specs →

Weld-Craft

Weld-Craft CDS 52 (17 ft.) 2007

2007

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft 1652 DD Econo 2013 vs Weld-Craft CDS 52 (17 ft.) 2007 — Same Brand, Different Boat

Matching a modified vee Weld-Craft 1652 DD Econo 2013 against a flat Weld-Craft CDS 52 (17 ft.) 2007 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 80 hp, the Weld-Craft 1652 DD Econo 2013 has a 45-hp advantage over the Weld-Craft CDS 52 (17 ft.) 2007's 35-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Weld-Craft 1652 DD Econo 2013 and its 80-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weld-Craft CDS 52 (17 ft.) 2007 with its 35-hp rating is the more economical daily driver.

General Boat Info

MakeWeld-Craft

Model1652 DD Econo

ModelCDS 52 (17 ft.)

Model Year2013

Model Year2007

Measurements / Dimensions

Beam74 in

Beam - Meters1.88

Beam - Inches74

Weight - Detail700 lbs

Weight - Detailnot available

Weight - kg317.51

Weight - kgnot available

Weight - lbs.7

Weight - lbs.not available

Width [transom] - Detail52 in. bottom

Width [transom] - Detailnot available

Height - Detail22 in. side

Height - DetailSide: 22 in

Height - Meters0.56

Height - Inches22

Length - Feet16

Length - Feet17

Length overall - Detail16 ft

Length overall - Detail17 ft. 0 in

Length overall - Meters4.88

Length overall - Meters5.18

Length overall - Inches192

Length overall - Inches204

Body / Hull

Hull materialAluminum

Hull thickness0.100 in

Hull thicknessnot available

Hull typeModified Vee

Hull typeFlat

Engine and Drivetrain

Engine model22 in. shaft

Engine modelnot available

Fuel typeGas

Drive typeOutboard

Drive typeNone

Horsepower80 hp remote

Horsepowernot available

Engine maxnot available

Engine max35 hp (manual)

Operational Info

Maximum capacity1,148 lbs

Maximum capacitynot available

Maximum people5 / 705 lbs

Maximum peoplenot available

Weld-Craft 1652 DD Econo 2013 vs Weld-Craft CDS 52 (17 ft.) 2007 — Common Questions

Which is the larger boat — the Weld-Craft 1652 DD Econo 2013 or the Weld-Craft CDS 52 (17 ft.) 2007?

The Weld-Craft CDS 52 (17 ft.) 2007 is the longer of the two at 17,0 feet overall. The Weld-Craft 1652 DD Econo 2013 comes in at 16,0 feet, making it roughly 1,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which boat can handle a bigger outboard?

The Weld-Craft 1652 DD Econo 2013 is rated to a maximum of 80 hp, giving it the larger power ceiling. The Weld-Craft CDS 52 (17 ft.) 2007 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Weld-Craft 1652 DD Econo 2013 is Coast Guard rated for 5 passengers, while the Weld-Craft CDS 52 (17 ft.) 2007 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Do these boats require an oversize trailer permit to tow on US highways?

Both the Weld-Craft 1652 DD Econo 2013 and Weld-Craft CDS 52 (17 ft.) 2007 share an 74 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.

Are the Weld-Craft 1652 DD Econo 2013 and Weld-Craft CDS 52 (17 ft.) 2007 from the same manufacturer?

Yes — both the Weld-Craft 1652 DD Econo 2013 and the Weld-Craft CDS 52 (17 ft.) 2007 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft 1652 DD Econo 2013 full specs ← Weld-Craft CDS 52 (17 ft.) 2007 full specs