Weld-Craft 1652 DD Econo 2013 boat specs
Weld-Craft
Weld-Craft 1652 DD Econo 2013
2013
View full specs →
VS
Weldcraft Marine 21 Legacy 2008 boat specs
Weld-Craft
Weldcraft Marine 21 Legacy 2008
2008
View full specs →

Weld-Craft 1652 DD Econo 2013 vs Weldcraft Marine 21 Legacy 2008: Same Brand, Different Boat

The Weld-Craft 1652 DD Econo 2013 is a modified-V design and the Weldcraft Marine 21 Legacy 2008 is a deep-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

Size is the most obvious dividing line here. The Weldcraft Marine 21 Legacy 2008 measures 21,0 feet overall (2008), giving it roughly 5,0 additional feet of deck space compared to the Weld-Craft 1652 DD Econo 2013 at 16,0 feet (2013). Weight tells a clearer story for trailering families: the Weldcraft Marine 21 Legacy 2008 tips the scales at 3 100 lbs - 2 400 lbs less than the Weld-Craft 1652 DD Econo 2013 at 700 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Weld-Craft 1652 DD Econo 2013 carries a rated maximum of 80 hp. Engine data for the Weldcraft Marine 21 Legacy 2008 wasn't available in our records - check the manufacturer's spec sheet before sizing a motor.

For family outings this is probably the sharpest distinction between the two. The Weldcraft Marine 21 Legacy 2008 is rated for 6 passengers, while the Weld-Craft 1652 DD Econo 2013 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Weldcraft Marine 21 Legacy 2008 could be the deciding factor.

Bottom line: Choose the Weldcraft Marine 21 Legacy 2008 if your priority is putting more people on the water - it handles 6 passengers and at 21,0 ft it has the deck room to back that rating up comfortably. The Weld-Craft 1652 DD Econo 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 5 that costs less to run day-to-day.
General Boat Info
MakeWeld-Craft
MakeWeldcraft Marine
Model1652 DD Econo
Model21 Legacy
Model Year2013
Model Year2008
Measurements / Dimensions
Beam74 in.
Beam95 in.
Beam - Meters1.88
Beam - Meters2.41
Beam - Inches74
Beam - Inches95
Weight - Detail700 lbs.
Weight - Detail3,100 lbs.
Weight - kg317.51
Weight - kg1406.14
Weight - lbs.700
Weight - lbs.3100
Width [transom] - Detail52 in. bottom
Width [transom] - Detailnot available
Height - Detail22 in. side
Height - Detailnot available
Height - Meters0.56
Height - Metersnot available
Height - Inches22
Height - Inchesnot available
Length - Feet16
Length - Feet21
Length overall - Detail16 ft.
Length overall - Detail21 ft. 0 in.
Length overall - Meters4.88
Length overall - Meters6.4
Length overall - Inches192
Length overall - Inches252
Deadrisenot available
DeadriseBottom: 14° at transom
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in.
Hull thicknessnot available
Hull typeModified Vee
Hull typeDeep Vee
Engine and Drivetrain
Engine model22 in. shaft
Engine modelnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeJet Drive
Horsepower80 hp remote
Horsepowernot available
Engine/s standardnot available
Engine/s standardMarine Power 350 MPI V-8 Pump: Hamilton 212 Turbo Impeller
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail62 gal.
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters234.7
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal62
Operational Info
Maximum capacity1,148 lbs.
Maximum capacitynot available
Maximum people5 / 705 lbs.
Maximum peoplenot available

Weld-Craft 1652 DD Econo 2013 vs Weldcraft Marine 21 Legacy 2008 - Common Questions

Which is the larger boat - the Weld-Craft 1652 DD Econo 2013 or the Weldcraft Marine 21 Legacy 2008?
The Weldcraft Marine 21 Legacy 2008 is the longer of the two at 21,0 feet overall. The Weld-Craft 1652 DD Econo 2013 comes in at 16,0 feet, making it roughly 5,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Weld-Craft 1652 DD Econo 2013 or the Weldcraft Marine 21 Legacy 2008?
For trailering, the Weld-Craft 1652 DD Econo 2013 has the edge at 700 lbs dry weight versus 3 100 lbs for the Weldcraft Marine 21 Legacy 2008. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Weld-Craft 1652 DD Econo 2013 has a documented max rating of 80 hp. Engine specifications for the Weldcraft Marine 21 Legacy 2008 were not available in our database - check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Weld-Craft 1652 DD Econo 2013 is Coast Guard rated for 5 passengers, while the Weldcraft Marine 21 Legacy 2008 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weldcraft Marine 21 Legacy 2008 measures 95" wide, compared to 74" for the Weld-Craft 1652 DD Econo 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1652 DD Econo 2013 and Weldcraft Marine 21 Legacy 2008 from the same manufacturer?
Yes - both the Weld-Craft 1652 DD Econo 2013 and the Weldcraft Marine 21 Legacy 2008 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.