Weld-Craft 1652 DD Econo 2013 boat specs
Weld-Craft
Weld-Craft 1652 DD Econo 2013
2013
View full specs →
VS
Weldcraft Marine 20 Sabre 2013 boat specs
Weld-Craft
Weldcraft Marine 20 Sabre 2013
2013
View full specs →

Weld-Craft 1652 DD Econo 2013 vs Weldcraft Marine 20 Sabre 2013: Same Brand, Different Boat

The Weld-Craft 1652 DD Econo 2013 is a modified-V design and the Weldcraft Marine 20 Sabre 2013 is a deep-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

Size is the most obvious dividing line here. The Weldcraft Marine 20 Sabre 2013 measures 20,3 feet overall (2013), giving it roughly 4,3 additional feet of deck space compared to the Weld-Craft 1652 DD Econo 2013 at 16,0 feet (2013). Weight tells a clearer story for trailering families: the Weldcraft Marine 20 Sabre 2013 tips the scales at 2 600 lbs - 1 900 lbs less than the Weld-Craft 1652 DD Econo 2013 at 700 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Weld-Craft 1652 DD Econo 2013 carries a rated maximum of 80 hp. Engine data for the Weldcraft Marine 20 Sabre 2013 wasn't available in our records - check the manufacturer's spec sheet before sizing a motor.

For family outings this is probably the sharpest distinction between the two. The Weldcraft Marine 20 Sabre 2013 is rated for 6 passengers, while the Weld-Craft 1652 DD Econo 2013 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Weldcraft Marine 20 Sabre 2013 could be the deciding factor.

Bottom line: Choose the Weldcraft Marine 20 Sabre 2013 if your priority is putting more people on the water - it handles 6 passengers and at 20,3 ft it has the deck room to back that rating up comfortably. The Weld-Craft 1652 DD Econo 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 5 that costs less to run day-to-day.
General Boat Info
MakeWeld-Craft
MakeWeldcraft Marine
Model1652 DD Econo
Model20 Sabre
Model Year2013
Model Year2013
Measurements / Dimensions
Beam74 in.
Beam94 in.
Beam - Meters1.88
Beam - Meters2.39
Beam - Inches74
Beam - Inches94
Weight - Detail700 lbs.
Weight - Detail2,600 lbs.
Weight - kg317.51
Weight - kg1179.34
Weight - lbs.700
Weight - lbs.2600
Width [transom] - Detail52 in. bottom
Width [transom] - Detail94 in.
Height - Detail22 in. side
Height - DetailSides: 33 in.
Height - Meters0.56
Height - Meters0.84
Height - Inches22
Height - Inches33
Length - Feet16
Length - Feet20.25
Length overall - Detail16 ft.
Length overall - Detail20 ft. 3 in.
Length overall - Meters4.88
Length overall - Meters6.17
Length overall - Inches192
Length overall - Inches243
Deadrisenot available
DeadriseTransom: 12°
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in.
Hull thicknessBottom: 0.19 in. Sides: 0.125 in. Transom: 0.19 in.
Hull typeModified Vee
Hull typeDeep Vee
Engine and Drivetrain
Engine model22 in. shaft
Engine model5.7 l MEFI-5
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeJet Drive
Horsepower80 hp remote
Horsepowernot available
Jet pumpnot available
Jet pumpAmerican Turbine SD-309
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail62 gal.
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters234.7
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal62
Operational Info
Maximum capacity1,148 lbs.
Maximum capacitynot available
Maximum people5 / 705 lbs.
Maximum peoplenot available

Weld-Craft 1652 DD Econo 2013 vs Weldcraft Marine 20 Sabre 2013 - Common Questions

Which is the larger boat - the Weld-Craft 1652 DD Econo 2013 or the Weldcraft Marine 20 Sabre 2013?
The Weldcraft Marine 20 Sabre 2013 is the longer of the two at 20,3 feet overall. The Weld-Craft 1652 DD Econo 2013 comes in at 16,0 feet, making it roughly 4,3 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Weld-Craft 1652 DD Econo 2013 or the Weldcraft Marine 20 Sabre 2013?
For trailering, the Weld-Craft 1652 DD Econo 2013 has the edge at 700 lbs dry weight versus 2 600 lbs for the Weldcraft Marine 20 Sabre 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Weld-Craft 1652 DD Econo 2013 has a documented max rating of 80 hp. Engine specifications for the Weldcraft Marine 20 Sabre 2013 were not available in our database - check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Weld-Craft 1652 DD Econo 2013 is Coast Guard rated for 5 passengers, while the Weldcraft Marine 20 Sabre 2013 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weldcraft Marine 20 Sabre 2013 measures 94" wide, compared to 74" for the Weld-Craft 1652 DD Econo 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1652 DD Econo 2013 and Weldcraft Marine 20 Sabre 2013 from the same manufacturer?
Yes - both the Weld-Craft 1652 DD Econo 2013 and the Weldcraft Marine 20 Sabre 2013 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.