Weld-Craft 1648 VCDS 2012 boat specs
Weld-Craft
Weld-Craft 1648 VCDS 2012
2012
View full specs →
VS
Weld-Craft UVCDS 36 (12 ft.) 2009 boat specs
Weld-Craft
Weld-Craft UVCDS 36 (12 ft.) 2009
2009
View full specs →

Weld-Craft 1648 VCDS 2012 vs Weld-Craft UVCDS 36 (12 ft.) 2009 — Same Brand, Different Boat

Matching a modified vee Weld-Craft 1648 VCDS 2012 against a flat Weld-Craft UVCDS 36 (12 ft.) 2009 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

Both boats share a closely matched power ceiling — 35 hp for the Weld-Craft 1648 VCDS 2012 and 15 hp for the Weld-Craft UVCDS 36 (12 ft.) 2009. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Bottom line: The Weld-Craft 1648 VCDS 2012 at 16,0 ft is the right call if deck space, comfort, and entertaining are top of your list. The Weld-Craft UVCDS 36 (12 ft.) 2009 at 12,0 ft wins on trailering ease, likely lower purchase price, and simpler docking — a solid choice for a buyer who wants more boat for less money.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1648 VCDS
ModelUVCDS 36 (12 ft.)
Model Year2012
Model Year2009
Measurements / Dimensions
Beam74 in
Beam59 in
Beam - Meters1.88
Beam - Meters1.5
Beam - Inches74
Beam - Inches59
Width [transom] - Detail49 in. bottom
Width [transom] - Detailnot available
Height - Detail22 in. side
Height - DetailSide: 19 in
Height - Meters0.56
Height - Meters0.48
Height - Inches22
Height - Inches19
Length - Feet16
Length - Feet12
Length overall - Detailnot available
Length overall - Detail12 ft. 0 in
Length overall - Metersnot available
Length overall - Meters3.66
Length overall - Inchesnot available
Length overall - Inches144
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in
Hull thicknessnot available
Hull typeModified Vee
Hull typeFlat
Engine and Drivetrain
Engine model17 or 21 in. shaft
Engine modelnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeNone
Horsepower35 hp manual
Horsepowernot available
Engine maxnot available
Engine max15 hp (manual)

Weld-Craft 1648 VCDS 2012 vs Weld-Craft UVCDS 36 (12 ft.) 2009 — Common Questions

Which is the larger boat — the Weld-Craft 1648 VCDS 2012 or the Weld-Craft UVCDS 36 (12 ft.) 2009?
The Weld-Craft 1648 VCDS 2012 is the longer of the two at 16,0 feet overall. The Weld-Craft UVCDS 36 (12 ft.) 2009 comes in at 12,0 feet, making it roughly 4,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft 1648 VCDS 2012 is rated to a maximum of 35 hp, giving it the larger power ceiling. The Weld-Craft UVCDS 36 (12 ft.) 2009 tops out at 15 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many passengers can the Weld-Craft UVCDS 36 (12 ft.) 2009 carry?
The Weld-Craft UVCDS 36 (12 ft.) 2009 has an official capacity rating of 3 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.
Which boat is wider, and does it affect trailering?
The Weld-Craft 1648 VCDS 2012 measures 74" wide, compared to 59" for the Weld-Craft UVCDS 36 (12 ft.) 2009. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1648 VCDS 2012 and Weld-Craft UVCDS 36 (12 ft.) 2009 from the same manufacturer?
Yes — both the Weld-Craft 1648 VCDS 2012 and the Weld-Craft UVCDS 36 (12 ft.) 2009 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.