Weld-Craft 1648 VCDS 2012 boat specs
Weld-Craft
Weld-Craft 1648 VCDS 2012
2012
View full specs →
VS
Weld-Craft RL 60 (20 ft.) 2010 boat specs
Weld-Craft
Weld-Craft RL 60 (20 ft.) 2010
2010
View full specs →

Weld-Craft 1648 VCDS 2012 vs Weld-Craft RL 60 (20 ft.) 2010: Same Brand, Different Boat

The Weld-Craft 1648 VCDS 2012 is a modified-V design and the Weld-Craft RL 60 (20 ft.) 2010 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

Both boats share a closely matched power ceiling - 35 hp for the Weld-Craft 1648 VCDS 2012 and 40 hp for the Weld-Craft RL 60 (20 ft.) 2010. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Bottom line: The Weld-Craft RL 60 (20 ft.) 2010 at 20,0 ft is the right call if deck space, comfort, and entertaining are top of your list. The Weld-Craft 1648 VCDS 2012 at 16,0 ft wins on trailering ease, likely lower purchase price, and simpler docking - a solid choice for a buyer who wants more boat for less money.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1648 VCDS
ModelRL 60 (20 ft.)
Model Year2012
Model Year2010
Measurements / Dimensions
Beam74 in.
Beam84 in.
Beam - Meters1.88
Beam - Meters2.13
Beam - Inches74
Beam - Inches84
Width [transom] - Detail49 in. bottom
Width [transom] - Detailnot available
Height - Detail22 in. side
Height - DetailSide: 26 in.
Height - Meters0.56
Height - Meters0.66
Height - Inches22
Height - Inches26
Length - Feet16
Length - Feet20
Length overall - Detailnot available
Length overall - Detail20 ft. 0 in.
Length overall - Metersnot available
Length overall - Meters6.1
Length overall - Inchesnot available
Length overall - Inches240
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in.
Hull thicknessnot available
Hull typeModified Vee
Hull typeFlat
Engine and Drivetrain
Engine model17 or 21 in. shaft
Engine modelnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeNone
Horsepower35 hp manual
Horsepowernot available
Engine maxnot available
Engine max40 hp (manual)

Weld-Craft 1648 VCDS 2012 vs Weld-Craft RL 60 (20 ft.) 2010 - Common Questions

Which is the larger boat - the Weld-Craft 1648 VCDS 2012 or the Weld-Craft RL 60 (20 ft.) 2010?
The Weld-Craft RL 60 (20 ft.) 2010 is the longer of the two at 20,0 feet overall. The Weld-Craft 1648 VCDS 2012 comes in at 16,0 feet, making it roughly 4,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
How many passengers can the Weld-Craft RL 60 (20 ft.) 2010 carry?
The Weld-Craft RL 60 (20 ft.) 2010 has an official capacity rating of 6 people. Capacity data wasn't available for the other model in this comparison - verify directly with the dealer.
Which boat is wider, and does it affect trailering?
The Weld-Craft RL 60 (20 ft.) 2010 measures 84" wide, compared to 74" for the Weld-Craft 1648 VCDS 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1648 VCDS 2012 and Weld-Craft RL 60 (20 ft.) 2010 from the same manufacturer?
Yes - both the Weld-Craft 1648 VCDS 2012 and the Weld-Craft RL 60 (20 ft.) 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.