Weld-Craft 1648 VCDS 2012 boat specs
Weld-Craft
Weld-Craft 1648 VCDS 2012
2012
View full specs →
VS
Weldcraft Marine 188 2010 boat specs
Weld-Craft
Weldcraft Marine 188 2010
2010
View full specs →

Weld-Craft 1648 VCDS 2012 vs Weldcraft Marine 188 2010 — Same Brand, Different Boat

Matching a modified vee Weld-Craft 1648 VCDS 2012 against a deep vee Weldcraft Marine 188 2010 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 150 hp, the Weldcraft Marine 188 2010 has a 115-hp advantage over the Weld-Craft 1648 VCDS 2012's 35-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Bottom line: The Weldcraft Marine 188 2010 at 18,7 ft is the right call if deck space, comfort, and entertaining are top of your list. The Weld-Craft 1648 VCDS 2012 at 16,0 ft wins on trailering ease, likely lower purchase price, and simpler docking — a solid choice for a buyer who wants more boat for less money.
General Boat Info
MakeWeld-Craft
MakeWeldcraft Marine
Model1648 VCDS
Model188
Model Year2012
Model Year201
Measurements / Dimensions
Beam74 in
Beam92 in
Beam - Meters1.88
Beam - Meters2.34
Beam - Inches74
Beam - Inches92
Width [transom] - Detail49 in. bottom
Width [transom] - Detail92 x 0.190 in
Height - Detail22 in. side
Height - DetailSides: 34 x 0.100 in
Height - Meters0.56
Height - Meters0
Height - Inches22
Height - Inches0.1
Length - Feet16
Length - Feet18.67
Deadrisenot available
Deadrise28.5° bow entry 24° forward entry 14° transom
Weight - Detailnot available
Weight - Detail1,360 lbs
Weight - kgnot available
Weight - kg616.89
Weight - lbs.not available
Weight - lbs.136
Length overall - Detailnot available
Length overall - Detail18 ft. 8 in
Length overall - Metersnot available
Length overall - Meters5.69
Length overall - Inchesnot available
Length overall - Inches224
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in
Hull thicknessnot available
Hull typeModified Vee
Hull typeDeep Vee
Engine and Drivetrain
Engine model17 or 21 in. shaft
Engine modelnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Horsepower35 hp manual
Horsepowernot available
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail42 gal
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters158.99
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal42
Engine maxnot available
Engine max150 hp

Weld-Craft 1648 VCDS 2012 vs Weldcraft Marine 188 2010 — Common Questions

Which is the larger boat — the Weld-Craft 1648 VCDS 2012 or the Weldcraft Marine 188 2010?
The Weldcraft Marine 188 2010 is the longer of the two at 18,7 feet overall. The Weld-Craft 1648 VCDS 2012 comes in at 16,0 feet, making it roughly 2,7 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weldcraft Marine 188 2010 is rated to a maximum of 150 hp, giving it the larger power ceiling. The Weld-Craft 1648 VCDS 2012 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many passengers can the Weldcraft Marine 188 2010 carry?
The Weldcraft Marine 188 2010 has an official capacity rating of 5 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.
Which boat is wider, and does it affect trailering?
The Weldcraft Marine 188 2010 measures 92" wide, compared to 74" for the Weld-Craft 1648 VCDS 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1648 VCDS 2012 and Weldcraft Marine 188 2010 from the same manufacturer?
Yes — both the Weld-Craft 1648 VCDS 2012 and the Weldcraft Marine 188 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.