Weld-Craft 1648 VCDS 2011 vs Weldcraft Marine 17 Angler SE 2009 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft 1648 VCDS 2011 or the Weldcraft Marine 17 Angler SE 2009?

The Weldcraft Marine 17 Angler SE 2009 is the longer of the two at 17,3 feet overall. The Weld-Craft 1648 VCDS 2011 comes in at 16,0 feet, making it roughly 1,3 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which boat can handle a bigger outboard?

The Weldcraft Marine 17 Angler SE 2009 is rated to a maximum of 90 hp, giving it the larger power ceiling. The Weld-Craft 1648 VCDS 2011 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many passengers can the Weldcraft Marine 17 Angler SE 2009 carry?

The Weldcraft Marine 17 Angler SE 2009 has an official capacity rating of 5 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.

Q: Which boat is wider, and does it affect trailering?

The Weldcraft Marine 17 Angler SE 2009 measures 82" wide, compared to 74" for the Weld-Craft 1648 VCDS 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Weld-Craft 1648 VCDS 2011 and Weldcraft Marine 17 Angler SE 2009 from the same manufacturer?

Yes — both the Weld-Craft 1648 VCDS 2011 and the Weldcraft Marine 17 Angler SE 2009 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft 1648 VCDS 2011 vs Weldcraft Marine 17 Angler SE 2009

Weld-Craft

Weld-Craft 1648 VCDS 2011

2011

View full specs →

Weld-Craft

Weldcraft Marine 17 Angler SE 2009

2009

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft 1648 VCDS 2011 vs Weldcraft Marine 17 Angler SE 2009 — Same Brand, Different Boat

Matching a flat Weld-Craft 1648 VCDS 2011 against a deep vee Weldcraft Marine 17 Angler SE 2009 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 90 hp, the Weldcraft Marine 17 Angler SE 2009 has a 55-hp advantage over the Weld-Craft 1648 VCDS 2011's 35-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Bottom line: Performance buyers should lean toward the Weldcraft Marine 17 Angler SE 2009 and its 90-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weld-Craft 1648 VCDS 2011 with its 35-hp rating is the more economical daily driver.

General Boat Info

MakeWeld-Craft

MakeWeldcraft Marine

Model1648 VCDS

Model17 Angler SE

Model Year2011

Model Year2009

Measurements / Dimensions

Beam74 in

Beam82 in

Beam - Meters1.88

Beam - Meters2.08

Beam - Inches74

Beam - Inches82

Width [transom] - Detail49 in

Width [transom] - Detail80 x 0.160 in

Height - Detail22 in. side

Height - Detail28 x 0.100 in. sides

Height - Meters0.56

Height - Meters0

Height - Inches22

Height - Inches0.1

Length - Feet16

Length - Feet17.25

Deadrisenot available

Deadrise22° bow entry 17° forward entry 10° transom

Weight - Detailnot available

Weight - Detail975 lbs

Weight - kgnot available

Weight - kg442.25

Weight - lbs.not available

Weight - lbs.975

Length overall - Detailnot available

Length overall - Detail17 ft. 3 in

Length overall - Metersnot available

Length overall - Meters5.26

Length overall - Inchesnot available

Length overall - Inches207

Body / Hull

Hull materialAluminum

Hull thickness0.1

Hull thicknessnot available

Hull typeFlat

Hull typeDeep Vee

Engine and Drivetrain

Fuel typeGas

Drive typeOutboard

Horsepower35 hp manual

Horsepowernot available

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail21 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters79.49

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal21

Engine maxnot available

Engine max90 hp (prop) 115/80 hp (Jet)

Operational Info

Maximum capacitynot available

Maximum capacity1,300 lbs

Maximum peoplenot available

Maximum people5 / 665 lbs

Weld-Craft 1648 VCDS 2011 vs Weldcraft Marine 17 Angler SE 2009 — Common Questions

Which is the larger boat — the Weld-Craft 1648 VCDS 2011 or the Weldcraft Marine 17 Angler SE 2009?

The Weldcraft Marine 17 Angler SE 2009 is the longer of the two at 17,3 feet overall. The Weld-Craft 1648 VCDS 2011 comes in at 16,0 feet, making it roughly 1,3 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which boat can handle a bigger outboard?

The Weldcraft Marine 17 Angler SE 2009 is rated to a maximum of 90 hp, giving it the larger power ceiling. The Weld-Craft 1648 VCDS 2011 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many passengers can the Weldcraft Marine 17 Angler SE 2009 carry?

The Weldcraft Marine 17 Angler SE 2009 has an official capacity rating of 5 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.

Which boat is wider, and does it affect trailering?

The Weldcraft Marine 17 Angler SE 2009 measures 82" wide, compared to 74" for the Weld-Craft 1648 VCDS 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Weld-Craft 1648 VCDS 2011 and Weldcraft Marine 17 Angler SE 2009 from the same manufacturer?

Yes — both the Weld-Craft 1648 VCDS 2011 and the Weldcraft Marine 17 Angler SE 2009 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft 1648 VCDS 2011 full specs ← Weldcraft Marine 17 Angler SE 2009 full specs