Weld-Craft 1648 UV Econo Bass 2007 boat specs
Weld-Craft
Weld-Craft 1648 UV Econo Bass 2007
2007
View full specs →
VS
Weld-Craft RL 48 (14 ft.) 2010 boat specs
Weld-Craft
Weld-Craft RL 48 (14 ft.) 2010
2010
View full specs →

Weld-Craft 1648 UV Econo Bass 2007 vs Weld-Craft RL 48 (14 ft.) 2010 — A Close Look at Two Flats

When two boats share the same hull type — in this case both the Weld-Craft 1648 UV Econo Bass 2007 and the Weld-Craft RL 48 (14 ft.) 2010 are flat designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

The power gap is worth calling out. Rated to 75 hp, the Weld-Craft 1648 UV Econo Bass 2007 has a 50-hp advantage over the Weld-Craft RL 48 (14 ft.) 2010's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 4 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Weld-Craft 1648 UV Econo Bass 2007 and its 75-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weld-Craft RL 48 (14 ft.) 2010 with its 25-hp rating is the more economical daily driver.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1648 UV Econo Bass
ModelRL 48 (14 ft.)
Model Year2007
Model Year201
Measurements / Dimensions
Beam70 in
Beam70 in
Beam - Meters1.78
Beam - Meters1.78
Beam - Inches7
Beam - Inches7
Height - DetailSide: 22 in
Height - DetailSide: 22 in
Height - Meters0.56
Height - Meters0.56
Height - Inches22
Height - Inches22
Length - Feet16
Length - Feet14
Length overall - Detail16 ft
Length overall - Detail14 ft. 0 in
Length overall - Meters4.88
Length overall - Meters4.27
Length overall - Inches192
Length overall - Inches168
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeFlat
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeNone
Engine max75 hp (remote)
Engine max25 hp (manual)

Weld-Craft 1648 UV Econo Bass 2007 vs Weld-Craft RL 48 (14 ft.) 2010 — Common Questions

Which is the larger boat — the Weld-Craft 1648 UV Econo Bass 2007 or the Weld-Craft RL 48 (14 ft.) 2010?
The Weld-Craft 1648 UV Econo Bass 2007 is the longer of the two at 16,0 feet overall. The Weld-Craft RL 48 (14 ft.) 2010 comes in at 14,0 feet, making it roughly 2,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft 1648 UV Econo Bass 2007 is rated to a maximum of 75 hp, giving it the larger power ceiling. The Weld-Craft RL 48 (14 ft.) 2010 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Weld-Craft 1648 UV Econo Bass 2007 is Coast Guard rated for 4 passengers, while the Weld-Craft RL 48 (14 ft.) 2010 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Weld-Craft 1648 UV Econo Bass 2007 and Weld-Craft RL 48 (14 ft.) 2010 share an 70 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the Weld-Craft 1648 UV Econo Bass 2007 and Weld-Craft RL 48 (14 ft.) 2010 from the same manufacturer?
Yes — both the Weld-Craft 1648 UV Econo Bass 2007 and the Weld-Craft RL 48 (14 ft.) 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.