Weld-Craft 1648 UV Crappie 2011 boat specs
Weld-Craft
Weld-Craft 1648 UV Crappie 2011
2011
View full specs →
VS
Weld-Craft RL 44 (15 ft.) 2010 boat specs
Weld-Craft
Weld-Craft RL 44 (15 ft.) 2010
2010
View full specs →

Weld-Craft 1648 UV Crappie 2011 vs Weld-Craft RL 44 (15 ft.) 2010: A Close Look at Two Flat-Bottom Boats

Both the Weld-Craft 1648 UV Crappie 2011 and the Weld-Craft RL 44 (15 ft.) 2010 are flat-bottom designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

Both boats share a closely matched power ceiling - 40 hp for the Weld-Craft 1648 UV Crappie 2011 and 25 hp for the Weld-Craft RL 44 (15 ft.) 2010. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Bottom line: The Weld-Craft 1648 UV Crappie 2011 and Weld-Craft RL 44 (15 ft.) 2010 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1648 UV Crappie
ModelRL 44 (15 ft.)
Model Year2011
Model Year2010
Measurements / Dimensions
Beam70 in.
Beam66 in.
Beam - Meters1.78
Beam - Meters1.68
Beam - Inches70
Beam - Inches66
Width [transom] - Detail48 in.
Width [transom] - Detailnot available
Height - Detail22 in. side
Height - DetailSide: 22 in.
Height - Meters0.56
Height - Meters0.56
Height - Inches22
Height - Inches22
Length - Feet16
Length - Feet15
Length overall - Detailnot available
Length overall - Detail15 ft. 0 in.
Length overall - Metersnot available
Length overall - Meters4.57
Length overall - Inchesnot available
Length overall - Inches180
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in.
Hull thicknessnot available
Hull typeFlat
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeNone
Horsepower40 hp stick
Horsepowernot available
Engine maxnot available
Engine max25 hp (manual)

Weld-Craft 1648 UV Crappie 2011 vs Weld-Craft RL 44 (15 ft.) 2010 - Common Questions

Which is the larger boat - the Weld-Craft 1648 UV Crappie 2011 or the Weld-Craft RL 44 (15 ft.) 2010?
The Weld-Craft 1648 UV Crappie 2011 is the longer of the two at 16,0 feet overall. The Weld-Craft RL 44 (15 ft.) 2010 comes in at 15,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft 1648 UV Crappie 2011 is rated to a maximum of 40 hp, giving it the larger power ceiling. The Weld-Craft RL 44 (15 ft.) 2010 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many passengers can the Weld-Craft RL 44 (15 ft.) 2010 carry?
The Weld-Craft RL 44 (15 ft.) 2010 has an official capacity rating of 4 people. Capacity data wasn't available for the other model in this comparison - verify directly with the dealer.
Which boat is wider, and does it affect trailering?
The Weld-Craft 1648 UV Crappie 2011 measures 70" wide, compared to 66" for the Weld-Craft RL 44 (15 ft.) 2010. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1648 UV Crappie 2011 and Weld-Craft RL 44 (15 ft.) 2010 from the same manufacturer?
Yes - both the Weld-Craft 1648 UV Crappie 2011 and the Weld-Craft RL 44 (15 ft.) 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.