Weld-Craft 1648 UV Crappie 2011 vs Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft 1648 UV Crappie 2011 or the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 is the longer of the two at 16,0 feet overall. The Weld-Craft 1648 UV Crappie 2011 comes in at 16,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which boat can handle a bigger outboard?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 is rated to a maximum of 65 hp, giving it the larger power ceiling. The Weld-Craft 1648 UV Crappie 2011 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many passengers can the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 carry?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 has an official capacity rating of 17 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.

Q: Which boat is wider, and does it affect trailering?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 measures 83" wide, compared to 7" for the Weld-Craft 1648 UV Crappie 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Weld-Craft 1648 UV Crappie 2011 and Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 from the same manufacturer?

Yes — both the Weld-Craft 1648 UV Crappie 2011 and the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft 1648 UV Crappie 2011 vs Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013

Weld-Craft

Weld-Craft 1648 UV Crappie 2011

2011

View full specs →

Weld-Craft

Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013

2013

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft 1648 UV Crappie 2011 vs Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 — Same Brand, Different Boat

Matching a flat Weld-Craft 1648 UV Crappie 2011 against a modified vee Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 65 hp, the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 has a 25-hp advantage over the Weld-Craft 1648 UV Crappie 2011's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Bottom line: Performance buyers should lean toward the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 and its 65-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weld-Craft 1648 UV Crappie 2011 with its 40-hp rating is the more economical daily driver.

General Boat Info

MakeWeld-Craft

Model1648 UV Crappie

Model60 - 70 in. Bottom V/UV Jon Boats

Model Year2011

Model Year2013

Measurements / Dimensions

Beam70 in

Beam83 in

Beam - Meters1.78

Beam - Meters2.11

Beam - Inches7

Beam - Inches83

Width [transom] - Detail48 in

Width [transom] - Detail60 in. bottom

Height - Detail22 in. side

Height - Detail22 in. sides

Height - Meters0.56

Height - Inches22

Length - Feet16

Weight - Detailnot available

Weight - Detail485 lbs

Weight - kgnot available

Weight - kg219.99

Weight - lbs.not available

Weight - lbs.485

Length overall - Detailnot available

Length overall - Detail16 ft

Length overall - Metersnot available

Length overall - Meters4.88

Length overall - Inchesnot available

Length overall - Inches192

Body / Hull

Hull materialAluminum

Hull thickness0.100 in

Hull thickness0.1

Hull typeFlat

Hull typeModified Vee

Engine and Drivetrain

Fuel typeGas

Drive typeOutboard

Drive typenot available

Horsepower40 hp stick

Horsepower65 hp manual 80 hp remote with 22 or 27 in. shaft

Engine modelnot available

Engine model17, 22 or 27 in. shaft

Operational Info

Maximum capacitynot available

Maximum capacity17 in. Shaft: 1,153 lbs. 22 or 27 in. Shaft: 1,307 lbs

Maximum peoplenot available

Maximum people17 in. Shaft: 5 / 705 lbs. 22 or 27 in. Shaft: 6 / 846 lbs

Weld-Craft 1648 UV Crappie 2011 vs Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 — Common Questions

Which is the larger boat — the Weld-Craft 1648 UV Crappie 2011 or the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 is the longer of the two at 16,0 feet overall. The Weld-Craft 1648 UV Crappie 2011 comes in at 16,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which boat can handle a bigger outboard?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 is rated to a maximum of 65 hp, giving it the larger power ceiling. The Weld-Craft 1648 UV Crappie 2011 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many passengers can the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 carry?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 has an official capacity rating of 17 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.

Which boat is wider, and does it affect trailering?

The Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 measures 83" wide, compared to 7" for the Weld-Craft 1648 UV Crappie 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Weld-Craft 1648 UV Crappie 2011 and Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 from the same manufacturer?

Yes — both the Weld-Craft 1648 UV Crappie 2011 and the Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft 1648 UV Crappie 2011 full specs ← Weld-Craft 60 - 70 in. Bottom V/UV Jon Boats 2013 full specs