Weld-Craft 1648 Stick 2011 vs Weldcraft Marine 280 Cuddy King 2012 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft 1648 Stick 2011 or the Weldcraft Marine 280 Cuddy King 2012?

The Weld-Craft 1648 Stick 2011 is the longer of the two at 16,0 feet overall. The Weldcraft Marine 280 Cuddy King 2012 comes in at 3,0 feet, making it roughly 13,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which boat can handle a bigger outboard?

The Weldcraft Marine 280 Cuddy King 2012 is rated to a maximum of 500 hp, giving it the larger power ceiling. The Weld-Craft 1648 Stick 2011 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many passengers can the Weldcraft Marine 280 Cuddy King 2012 carry?

The Weldcraft Marine 280 Cuddy King 2012 has an official capacity rating of 9 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.

Q: Which boat is wider, and does it affect trailering?

The Weldcraft Marine 280 Cuddy King 2012 measures 102" wide, compared to 7" for the Weld-Craft 1648 Stick 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Weld-Craft 1648 Stick 2011 and Weldcraft Marine 280 Cuddy King 2012 from the same manufacturer?

Yes — both the Weld-Craft 1648 Stick 2011 and the Weldcraft Marine 280 Cuddy King 2012 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft 1648 Stick 2011 vs Weldcraft Marine 280 Cuddy King 2012

Weld-Craft

Weld-Craft 1648 Stick 2011

2011

View full specs →

Weld-Craft

Weldcraft Marine 280 Cuddy King 2012

2012

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft 1648 Stick 2011 vs Weldcraft Marine 280 Cuddy King 2012 — Same Brand, Different Boat

Matching a flat Weld-Craft 1648 Stick 2011 against a deep vee Weldcraft Marine 280 Cuddy King 2012 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 500 hp, the Weldcraft Marine 280 Cuddy King 2012 has a 460-hp advantage over the Weld-Craft 1648 Stick 2011's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Bottom line: The Weld-Craft 1648 Stick 2011 at 16,0 ft is the right call if deck space, comfort, and entertaining are top of your list. The Weldcraft Marine 280 Cuddy King 2012 at 3,0 ft wins on trailering ease, likely lower purchase price, and simpler docking — a solid choice for a buyer who wants more boat for less money.

General Boat Info

MakeWeld-Craft

MakeWeldcraft Marine

Model1648 Stick

Model280 Cuddy King

Model Year2011

Model Year2012

Measurements / Dimensions

Beam70 in

Beam102 in

Beam - Meters1.78

Beam - Meters2.59

Beam - Inches7

Beam - Inches102

Width [transom] - Detail48 in

Width [transom] - Detail102 in

Height - Detail22 in. side

Height - DetailSides: 40 in

Height - Meters0.56

Height - Meters1.02

Height - Inches22

Height - Inches4

Length - Feet16

Length - Feet3

Deadrisenot available

DeadriseBow: 60° Transom: 20°

Weight - Detailnot available

Weight - Detail5,000 lbs

Weight - kgnot available

Weight - kg2267.96

Weight - lbs.not available

Weight - lbs.5

Length overall - Detailnot available

Length overall - Detail30 ft

Length overall - Metersnot available

Length overall - Meters9.14

Length overall - Inchesnot available

Length overall - Inches36

Body / Hull

Hull materialAluminum

Hull thickness0.100 in

Hull thicknessBottom: 0.25 in. Sides: 0.16 in. Transom: 0.19 in

Hull typeFlat

Hull typeDeep Vee

Engine and Drivetrain

Fuel typeGas

Drive typeOutboard

Horsepower40 hp stick

Horsepowernot available

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail130 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters492.1

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal13

Engine maxnot available

Engine max500 hp

Weld-Craft 1648 Stick 2011 vs Weldcraft Marine 280 Cuddy King 2012 — Common Questions

Which is the larger boat — the Weld-Craft 1648 Stick 2011 or the Weldcraft Marine 280 Cuddy King 2012?

The Weld-Craft 1648 Stick 2011 is the longer of the two at 16,0 feet overall. The Weldcraft Marine 280 Cuddy King 2012 comes in at 3,0 feet, making it roughly 13,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which boat can handle a bigger outboard?

The Weldcraft Marine 280 Cuddy King 2012 is rated to a maximum of 500 hp, giving it the larger power ceiling. The Weld-Craft 1648 Stick 2011 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many passengers can the Weldcraft Marine 280 Cuddy King 2012 carry?

The Weldcraft Marine 280 Cuddy King 2012 has an official capacity rating of 9 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.

Which boat is wider, and does it affect trailering?

The Weldcraft Marine 280 Cuddy King 2012 measures 102" wide, compared to 7" for the Weld-Craft 1648 Stick 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Weld-Craft 1648 Stick 2011 and Weldcraft Marine 280 Cuddy King 2012 from the same manufacturer?

Yes — both the Weld-Craft 1648 Stick 2011 and the Weldcraft Marine 280 Cuddy King 2012 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft 1648 Stick 2011 full specs ← Weldcraft Marine 280 Cuddy King 2012 full specs